Junction systems de Amphenol Conec

Catálogo de productos

Tenemos la solución ideal para ti

TC Componentes soluciones de electrónica industrial

TC Componentes: distribuidor de Amphenol en España

Te acompañamos en el diseño de tu producto

Con millones de opciones en el catálogo de Amphenol, elegir el conector correcto es todo un reto.

En TC Componentes navegamos la complejidad por ti.

Tanto si buscas confirmar tus ideas como obtener muestras, conocer precios o realizar pruebas, estamos a tu lado en cada paso del camino.

Somos especialistas en facilitar el proceso de diseño y minimizar errores. Esto significa que nos aseguramos de que encuentres el conector más óptimo para tu aplicación específica.

Reducimos la complejidad

Orientación técnica individualizada para elegir el conector correcto.

Soluciones a medida

Amplia gama de soluciones fiables y alta calidad.

Proveedor Fiable

Soporte técnico avanzado y soluciones de diseño a medida.

En el año 2023 entregamos más de 13 MILLONES de conectores

Catálogo de componentes Amphenol Conec - Junction systems

Fabricante

Amphenol Conec

Juctions systems provide a cost-effective and practical wiring system in the field for sensors and actors with a cabling system that meets IP67 requirement. Junction systems are used anywhere sensor and actor signals need to be extended quickly and easily for control systems. Individual signals are either connected directly to the system via a homerun cable or via a connection interface.

Codigo

Nombre

Características

Fabricante

PDFs

42-11755

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11756

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11757

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11758

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11759

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11760

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11761

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11762

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11763

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11764

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11765

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11766

M8x1

Size A-side=M8x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11767

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11768

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11769

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11770

M8x1

Size A-side	M8x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11776

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11777

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11778

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11779

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11780

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11781

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., IP range A-side=IP67, Locking type=Screwable, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C

Size A-side	M8x1
Design	DUO-Splitter
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
IP range A-side	IP67
Locking type	Screwable
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11782

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11783

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11784

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11785

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11786

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11787

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11788

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11789

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11790

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11791

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11792

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11793

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11794

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11795

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11796

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11797

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11798

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11799

DUO-Splitter

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11800

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11801

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11802

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11803

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11804

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11805

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11806

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-11807

DUO-Splitter

Size A-side=M8x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M8x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05100

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-25° C, Pollution degree=3/2

Size A-side	M12x1
Design	Y-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-25° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05101

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-25° C, Pollution degree=3/2

Size A-side	M12x1
Design	Y-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-25° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05103

Y-Splitter

Size A-side	M12x1
Design	Y-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-25° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05113

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 + 1x Male connector M12x1, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 + 1x Male connector M12x1
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05114

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05115

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05116

T-Splitter / Adapter

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05117

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05118

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05119

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05120

T-Splitter / Adapter

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05121

T-Splitter / Adapter

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05122

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Length cable/wire=0,3 m, Installation size exit=1x Female connector M8x1aAxial + 1x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Design	T-Splitter / Adapter
Length cable/wire	0,3 m
Installation size exit	1x Female connector M8x1aAxial + 1x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05123

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Length cable/wire=0,6 m, Installation size exit=1x Female connector M8x1aAxial + 1x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C, max. working temperature=+80° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Length cable/wire	0,6 m
Installation size exit	1x Female connector M8x1aAxial + 1x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05124

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Length cable/wire=0,3 m, Installation size exit=1x Female connector M8x1aAxial + 1x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C, max. working temperature=+80° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Length cable/wire	0,3 m
Installation size exit	1x Female connector M8x1aAxial + 1x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05125

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Length cable/wire=0,6 m, Installation size exit=1x Female connector M8x1aAxial + 1x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C, max. working temperature=+80° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Length cable/wire	0,6 m
Installation size exit	1x Female connector M8x1aAxial + 1x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05126

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05127

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05128

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05129

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05130

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=4-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	4-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05131

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05149

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05150

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05151

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05152

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=1x Female connector M12x1 axial, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	1x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05153

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05154

T-Splitter / Adapter

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05155

T-Splitter / Adapter

Size A-side=M12x1, Design=T-Splitter / Adapter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=4-pos.+PE, Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, min. working temperature=-30° C

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	4-pos.+PE
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05156

T-Splitter / Adapter

Size A-side	M12x1
Design	T-Splitter / Adapter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12463

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12464

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12465

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12466

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 axial, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 axial
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12467

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12468

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12469

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12470

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Female connector M8x1 angled, Pin configuration exit=3-pos., Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Female connector M8x1 angled
Pin configuration exit	3-pos.
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12603

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12604

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12605

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M12x1 axial, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12606

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Female connector M12x1 axial, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 axial
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12607

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 angled, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 angled
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12608

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 angled, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 angled
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12609

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M12x1 angled, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=Li9Y11Y, min. working temperature=-30° C

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 angled
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-12610

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Female connector M12x1 angled, Pin configuration exit=5-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Female connector M12x1 angled
Pin configuration exit	5-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16267

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16268

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16269

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16270

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16271

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16272

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16273

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16274

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Male connector M8x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Male connector M8x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16276

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16277

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16278

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16279

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16280

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16281

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16282

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=3 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	3 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16283

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M8x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M8x1 angled, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=angled, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M8x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M8x1 angled
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	angled
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16287

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16288

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16289

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16290

DUO-Splitter

Size A-side=M12x1, Design=DUO-Splitter, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Design	DUO-Splitter
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +50° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16291

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16292

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16293

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16294

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=5-pos., Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY, min. working temperature=-30° C

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	5-pos.
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16487

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16488

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16489

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16490

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=LiYY

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	LiYY
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	PVC
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Grey
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16491

M12x1

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Male connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16492

M12x1

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16493

M12x1

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-16494

M12x1

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	3 m
Installation size exit	2x Male connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-17083

M12x1

Size A-side=M12x1, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=3-pos., Locking type=Screwable, Configuration A-side=axial, Configuration B-side=axial, Shielding=Unshielded, Cable quality=Li9Y11Y

Size A-side	M12x1
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	3-pos.
Locking type	Screwable
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU halogeenfree high flexible
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05163

Tools/Accessories/Contacts

Size A-side=M12x1, Design=Clamp holder T-splitter M12x1, Style=Tools/Accessories/Contacts, Housing material=zinc die cast, Housing color=Black

Size A-side	M12x1
Design	Clamp holder T-splitter M12x1
Style	Tools/Accessories/Contacts
Housing material	zinc die cast
Housing color	Black

Amphenol Conec

43-11210

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Installation size exit=1x Female connector M12x1 + 1x Male connector M12x1, Pin configuration exit=5-pos., Configuration A-side=axial, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2, IP rating=IP67

Size A-side	M12x1
Design	Y-Splitter
Installation size exit	1x Female connector M12x1 + 1x Male connector M12x1
Pin configuration exit	5-pos.
Configuration A-side	axial
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	TPU, UL94
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05189

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Type B-side [Female, male]=Female connector axial, Locking type=Screwable, Screw connection [e.g. PG9, M16 etc.]=M12x1

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,34 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05190

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Type B-side [Female, male]=Female connector axial, Locking type=Screwable, Screw connection [e.g. PG9, M16 etc.]=M12x1

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,34 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05192

Y-Splitter

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,34 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05193

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,3 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Type B-side [Female, male]=Female connector axial, Locking type=Screwable, Screw connection [e.g. PG9, M16 etc.]=M12x1

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,3 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,25 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05194

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=0,6 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=8-pos., Type B-side [Female, male]=Female connector axial, Locking type=Screwable, Screw connection [e.g. PG9, M16 etc.]=M12x1

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	8-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,25 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05182

Y-Splitter

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	0,6 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,34 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05183

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Size B-side [e.g. M8, M12, 7/8" etc.]=M12x1, Length cable/wire=1,5 m, Installation size exit=2x Female connector M12x1 axial, Pin configuration exit=5-pos., Type B-side [Female, male]=Female connector axial, Locking type=Screwable, Screw connection [e.g. PG9, M16 etc.]=M12x1

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Size B-side [e.g. M8, M12, 7/8" etc.]	M12x1
Length cable/wire	1,5 m
Installation size exit	2x Female connector M12x1 axial
Pin configuration exit	5-pos.
Type B-side [Female, male]	Female connector axial
Locking type	Screwable
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
Shielding	Unshielded
Cable quality	Li9Y11Y
Wire cross section	0,34 mm²
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Cable quality [e.g. PP, PVC, TPE etc.]	TPU UL, halogenfree
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Cable color	Black
Insulator material	PA, UL 94
Housing material	TPU, UL94
Housing color	Grey
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-05184

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Pin configuration exit=8-pos., Screw connection [e.g. PG9, M16 etc.]=M12x1, Configuration A-side=axial, Configuration B-side=axial, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Pin configuration exit	8-pos.
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	PA, UL 94
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101

Amphenol Conec

43-05185

Y-Splitter

Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Pin configuration exit=3-pos., Screw connection [e.g. PG9, M16 etc.]=M12x1, Configuration A-side=axial, Configuration B-side=axial, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2, IP rating=IP67 in mated condition

Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Pin configuration exit	3-pos.
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,4 Nm
Insulation resistance	>=100M Ohm
Insulator material	PA, UL 94
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104

Amphenol Conec

43-05186

Y-Splitter

Size A-side=M12x1, Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Pin configuration exit=5-pos., Screw connection [e.g. PG9, M16 etc.]=M12x1, Configuration A-side=axial, Configuration B-side=axial, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2

Size A-side	M12x1
Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Pin configuration exit	5-pos.
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	PA, UL 94
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101

Amphenol Conec

43-05187

Y-Splitter

Design=Y-Splitter, Type A-side [ Female, Male]=Male connector axial, Pin configuration exit=5-pos., Screw connection [e.g. PG9, M16 etc.]=M12x1, Configuration A-side=axial, Configuration B-side=axial, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2, IP rating=IP67 in mated condition

Design	Y-Splitter
Type A-side [ Female, Male]	Male connector axial
Pin configuration exit	5-pos.
Screw connection [e.g. PG9, M16 etc.]	M12x1
Configuration A-side	axial
Configuration B-side	axial
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67 in mated condition
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	PA, UL 94
Coupling nut /-screw material	Zinc die cast
Coupling nut /-screw plating	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101

Amphenol Conec

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

TC Componentes te ofrece un profundo conocimiento técnico y la capacidad de brindar soluciones personalizadas.

Sabemos que el vasto catálogo de Amphenol puede ser abrumador, y nuestra colaboración en cada paso simplifica la búsqueda del conector adecuado. Si Amphenol no tiene lo que necesitas, te diremos dónde encontrarlo.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

En definitiva, ofrecemos soporte técnico avanzado, gestión eficiente de entregas y asesoría personalizada para que tu proyecto se ejecute sin errores y en el menor tiempo posible.

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

Atendemos proyectos de fabricantes de equipos electrónicos en sectores como energía renovable, automoción, transporte, automatización industrial, maquinaria agrícola y equipos médicos.

Nos especializamos en soluciones precisas y fiables para diseños complejos, ofreciendo asesoría personalizada y soporte técnico avanzado.

Nuestros servicios están dirigidos a empresas que valoran la alta calidad, la eficiencia y la capacidad de personalización de los productos de Amphenol para garantizar que cada componente cumpla con las exigencias específicas de su aplicación.

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

Los productos de Amphenol Industrial se utilizan frecuentemente en aplicaciones de energía renovable, automoción, transporte ferroviario y naval. También son esenciales en automatización industrial, maquinaria agrícola y equipos médicos.

Su robustez y fiabilidad los hacen ideales para sistemas de tráfico, vehículos eléctricos, equipos pesados y almacenamiento de energía donde se requieren conexiones de alta calidad y resistencia en entornos exigentes.

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial porque afecta directamente a la fiabilidad y el rendimiento del sistema. Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando la integridad del diseño.

En TC Componentes minimizamos estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

¿Hacéis muestras gratuitas de los productos de Amphenol?

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

Por eso, en la mayoría de casos ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar compras a gran escala.

No obstante, de forma puntual cobramos por muestras que requieren diseños muy personalizados o que soportan costes de producción por encima de la media.

¿Cuáles son los plazos de entrega de los productos de Amphenol?

En TC Componentes trabajamos para encontrar las soluciones logísticas más eficaces, como mantener stocks de seguridad o realizar envíos regulares. De esta manera nos aseguramos de que los plazos de entrega sean rápidos y eficientes.

En el caso de productos personalizados los tiempos de entrega pueden variar, pero siempre buscamos minimizar las demoras.

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico. Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

Junction systems de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

Catálogo de componentes Amphenol Conec - Junction systems

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

Junction systems de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

Circular Connectors Sensor Actor Line > Junction systems

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance