Sockets de Amphenol Conec

Catálogo de productos

Tenemos la solución ideal para ti

TC Componentes soluciones de electrónica industrial

TC Componentes: distribuidor de Amphenol en España

Te acompañamos en el diseño de tu producto

Con millones de opciones en el catálogo de Amphenol, elegir el conector correcto es todo un reto.

En TC Componentes navegamos la complejidad por ti.

Tanto si buscas confirmar tus ideas como obtener muestras, conocer precios o realizar pruebas, estamos a tu lado en cada paso del camino.

Somos especialistas en facilitar el proceso de diseño y minimizar errores. Esto significa que nos aseguramos de que encuentres el conector más óptimo para tu aplicación específica.

Reducimos la complejidad

Orientación técnica individualizada para elegir el conector correcto.

Soluciones a medida

Amplia gama de soluciones fiables y alta calidad.

Proveedor Fiable

Soporte técnico avanzado y soluciones de diseño a medida.

En el año 2023 entregamos más de 13 MILLONES de conectores

Catálogo de componentes Amphenol Conec - Sockets (Página 1 de 4)

Fabricante

Amphenol Conec

CONEC offers a comprehensive range of socket connectors in a wide variety of sizes, designs and connection types. Choose from sizes M8x1, M12x1 or 7/8″, flanges with stranded wire, PCB contacts or overmoulded variants for front or rear panel mounting, with PG9 or M16x1.5 thread.

Versions for direct PCB mounting in axial and angled design as well as insulation bodies for SMT/THR processing are also available.
In addition to screw and screw-snap locking systems, CONEC also offers socket connectors with M12 bayonet quick locking. The bayonet socket connectors with stranded wire connection or direct PCB connection are equipped with an internal thread in the mating area and therefore guarantee 100 % backwards compatibility with standard M12 connectors. This means that new systems can be fitted with the M12 bayonet on the device side without any concerns.

Codigo

Nombre

Características

Fabricante

PDFs

43-04458

Series M12 Bayonet locking

Style=Sockets, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector angled, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Locking type=M12 Bayonet/screwable, IP range A-side=IP67, min. working temperature=-40° C

Style	Sockets
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector angled
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Locking type	M12 Bayonet/screwable
IP range A-side	IP67
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

42-01429

Sockets

Style=Sockets, Size A-side=M8x1, Design=Sockets, Type A-side [ Female, Male]=Male connector angled, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin angled, Shielding=Shielded, min. working temperature=-25° C

Style	Sockets
Size A-side	M8x1
Design	Sockets
Type A-side [ Female, Male]	Male connector angled
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin angled
Shielding	Shielded
min. working temperature	-25° C
max. working temperature	+95° C

Amphenol Conec

41-40000

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG13,5, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40001

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40002

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40003

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40004

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40005

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40006

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40007

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40008

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40009

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40010

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40011

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40012

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40013

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40014

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40015

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40016

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40017

Sockets

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40018

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG13,5, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40019

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40020

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40021

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40022

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40023

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG13,5
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40024

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40025

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40026

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40030

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40031

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40032

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG18, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG18
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40039

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40040

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40041

Sockets

Style=Sockets, Size A-side=7/8, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, Wire cross section=AWG16, min. working temperature=-30° C [UL: -30° C]

Style	Sockets
Size A-side	7/8
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
Wire cross section	AWG16
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40042

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40043

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40044

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40045

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40046

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40047

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=PG11, Shielding=Unshielded, min. working temperature=-30° C [UL: -30° C], max. working temperature=+80° C [UL: +75° C]

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	PG11
Shielding	Unshielded
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C [UL: +75° C]
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Black
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40048

Sockets

Style=Sockets, Size A-side=7/8, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C, Pollution degree=3/2

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Blue
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40049

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Blue
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

41-40050

Sockets

Style	Sockets
Size A-side	7/8
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Insulation resistance	>=100M Ohm
Insulator material	TPU, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	PUR, UL94
Sealing compound material color	Blue
Standard current rating	IEC 60512-3
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 60664-1
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01000

Sockets

Style=Sockets, Size A-side=M8x1, Design=Sockets, Length cable/wire=0,2 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M8x0,5, Shielding=Unshielded, Wire cross section=AWG24

Style	Sockets
Size A-side	M8x1
Design	Sockets
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01001

Sockets

Style=Sockets, Size A-side=M8x1, Length cable/wire=0,2 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M8x0,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01032

Sockets

Style=Sockets, Size A-side=M8x1, Length cable/wire=0,2 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable / Snap in, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M8x0,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01033

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01034

Sockets

Style=Sockets, Size A-side=M8x1, Length cable/wire=0,2 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable / Snap in, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M8x1, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x1
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01035

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x1
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01069

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01070

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M8x0,5
Shielding	Unshielded
Wire cross section	AWG26
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01107

Sockets

Style=Sockets, Size A-side=M8x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable / Snap in, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M8x1, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M8x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01108

Sockets

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M8x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01114

Sockets

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable / Snap in
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M8x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01143

Sockets

Style=Sockets, Size A-side=M8x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M12x1, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01144

Sockets

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01145

Sockets

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01146

Sockets

Style	Sockets
Size A-side	M8x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01147

Sockets

Style=Sockets, Size A-side=M8x1, Length cable/wire=0,2 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M12x1, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01148

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01149

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C [UL: -30° C]
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

42-01150

Sockets

Style	Sockets
Size A-side	M8x1
Length cable/wire	0,2 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M12x1
Shielding	Unshielded
Wire cross section	AWG26
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01000

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01001

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01002

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01003

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01004

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01005

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01006

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, positioning possible, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting, positioning possible
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01007

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting, positioning possible
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01008

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting, positioning possible
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01009

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01010

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01011

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	1- 1,2 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01012

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01013

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01014

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01015

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01016

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01017

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01022

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-02324

High Temperature

Style=Sockets, Design=Square flange 20 mm, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Length cable/wire=0,5 m, min. working temperature=-30° C, max. working temperature=+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h

Style	Sockets
Design	Square flange 20 mm
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-02325

High Temperature

Style	Sockets
Design	Square flange 20 mm
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-02326

High Temperature

Style=Sockets, Design=Square flange 20 mm, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Length cable/wire=0,5 m, min. working temperature=-30° C, max. working temperature=+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h

Style	Sockets
Design	Square flange 20 mm
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-02327

High Temperature

Style	Sockets
Design	Square flange 20 mm
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01023

High Temperature

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01024

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01025

High Temperature

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01026

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04396

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-03380

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04301

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04305

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04306

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04302

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04307

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04308

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04303

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+85° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+85° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01027

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04398

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01028

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01029

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04397

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01030

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04399

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01031

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01032

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04400

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01033

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04402

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01034

Sockets

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01035

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04401

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01036

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-04403

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01037

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01038

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C, max. working temperature=+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01039

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01040

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01041

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01042

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01043

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01044

BUS Systems

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Industrial Ethernet
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Green
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01045

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01046

High Temperature

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01048

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01049

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01050

High Temperature

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01052

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01053

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting, positioning possible
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01054

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01059

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01060

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01061

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01062

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01063

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01064

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01065

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01066

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01069

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01070

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01071

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01072

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01073

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01074

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01075

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01076

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01077

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01078

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01079

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01080

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01081

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01082

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01083

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01084

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01085

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01086

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01087

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01088

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01089

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01090

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01091

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01092

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01093

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01094

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-104
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-104
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01095

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01096

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01097

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01098

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01099

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	1- 1,2 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01100

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01101

Sockets

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01102

Sockets

Style=Sockets, Size A-side=M12x1, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Shielding=Unshielded, Wire cross section=AWG24, min. working temperature=-30° C

Style	Sockets
Size A-side	M12x1
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Shielding	Unshielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Black
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01109

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01110

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01111

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Length cable/wire=0,5 m, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Style=Sockets, Bus systems=Industrial Ethernet, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Length cable/wire	0,5 m
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Style	Sockets
Bus systems	Industrial Ethernet
Configuration A-side	axial
Shielding	Shielded
Wire cross section	AWG24
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Wire isolation material	PVC
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Green
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01112

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01113

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01114

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01115

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01118

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Industrial Ethernet, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Industrial Ethernet
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Green
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01123

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01124

BUS Systems

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01125

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01126

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=12 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Profibus DP, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	12 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Profibus DP
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Violet
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01127

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01128

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01135

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01136

High Temperature

Style=Sockets, Design=Sockets, Size A-side=M12x1, Type A-side [ Female, Male]=Male connector axial, IP range A-side=IP67, Mounting options [e.g. front/back panel mounting etc.]=Positioning, Termination signal [e.g. clamp, crimp, solder, SMT]=Wire, Screw connection [e.g. PG9, M16 etc.]=PG9, Length cable/wire=0,5 m, min. working temperature=-30° C

Style	Sockets
Design	Sockets
Size A-side	M12x1
Type A-side [ Female, Male]	Male connector axial
IP range A-side	IP67
Mounting options [e.g. front/back panel mounting etc.]	Positioning
Termination signal [e.g. clamp, crimp, solder, SMT]	Wire
Screw connection [e.g. PG9, M16 etc.]	PG9
Length cable/wire	0,5 m
min. working temperature	-30° C
max. working temperature	+100°C bis zu 30.000h, +125°C bis zu 8.000h, +150°C bis zu 2000h
Wire cross section	AWG24

Amphenol Conec

43-01157

BUS Systems

Size A-side=M12x1, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Style=Sockets, Bus systems=Industrial Ethernet, Configuration A-side=axial

Size A-side	M12x1
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Style	Sockets
Bus systems	Industrial Ethernet
Configuration A-side	axial
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Green
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Sealing compound material	Polyurethan-Harz, UL94
Sealing compound material color	Blue
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01162

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Unshielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Unshielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-01163

Sockets

Style=Sockets, Size A-side=M12x1, Mounting options [e.g. front/back panel mounting etc.]=Front panel mounting, Locking type=Screwable, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Shielding=Shielded, min. working temperature=-30° C, max. working temperature=+80° C

Style	Sockets
Size A-side	M12x1
Mounting options [e.g. front/back panel mounting etc.]	Front panel mounting
Locking type	Screwable
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Shielding	Shielded
min. working temperature	-30° C
max. working temperature	+80° C
Pollution degree	3/2
IP rating	IP67
Sealing material	FPM
Mating cycles	>=100
Recommended torque	0,6 Nm
Insulation resistance	>=100M Ohm
Insulator material	TPU GF, UL94
Insulator color	Black
Housing material	copper alloy
Housing color	Nickel
Signal contact material	Copper alloy
Plating signal contact (mating area)	Gold over nickel
Standard current rating	IEC 61076-2-101
Standard mating cycles	IEC 60512-9a
Standard IP rating	IEC 60529
Standard insulation resistance	IEC 60512
Standard pollution degree	IEC 60664-1
Standard rated voltage	IEC 61076-2-101
Standard temperature range	IEC 60664-1

Amphenol Conec

43-03921

Series M12 Bayonet locking

Style=Sockets, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=5,5 mm, Screw connection [e.g. PG9, M16 etc.]=M12x1, Locking type=M12 Bayonet/screwable

Style	Sockets
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	5,5 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Locking type	M12 Bayonet/screwable
IP range A-side	IP65/IP67/IP69K
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-03920

Series M12 Bayonet locking

Style=Sockets, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector angled, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin angled, Installation height=9 mm, Screw connection [e.g. PG9, M16 etc.]=M12x1, Locking type=M12 Bayonet/screwable

Style	Sockets
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector angled
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin angled
Installation height	9 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Locking type	M12 Bayonet/screwable
IP range A-side	IP65/IP67/IP69K
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-03922

Series M12 Bayonet locking

Style=Sockets, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector angled, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin angled, Installation height=9 mm, Screw connection [e.g. PG9, M16 etc.]=M12x1, Locking type=M12 Bayonet/screwable, IP range A-side=IP65/IP67/IP69K

Style	Sockets
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector angled
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin angled
Installation height	9 mm
Screw connection [e.g. PG9, M16 etc.]	M12x1
Locking type	M12 Bayonet/screwable
IP range A-side	IP65/IP67/IP69K
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-03923

Series M12 Bayonet locking

Style=Sockets, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5, Locking type=M12 Bayonet/screwable, IP range A-side=IP65/IP67/IP69K

Style	Sockets
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Locking type	M12 Bayonet/screwable
IP range A-side	IP65/IP67/IP69K
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-04345

Series M12 Bayonet locking

Style=Sockets, Performance=Cat 6A/10Gbit´s, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=THR, Installation height=10 mm, Screw connection [e.g. PG9, M16 etc.]=M16x1,5

Style	Sockets
Performance	Cat 6A/10Gbit´s
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	THR
Installation height	10 mm
Screw connection [e.g. PG9, M16 etc.]	M16x1,5
Locking type	M12 Bayonet/screwable
IP range A-side	IP67
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-04484

Series M12 Bayonet locking

Style=Sockets, Performance=Cat 6A/10Gbit´s, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector angled, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin angled, Screw connection [e.g. PG9, M16 etc.]=M12x1, Locking type=M12 Bayonet/screwable

Style	Sockets
Performance	Cat 6A/10Gbit´s
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector angled
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin angled
Screw connection [e.g. PG9, M16 etc.]	M12x1
Locking type	M12 Bayonet/screwable
IP range A-side	IP67
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

43-04455

Series M12 Bayonet locking

Style=Sockets, Bus systems=Industrial Ethernet, Size A-side=M12x1, Design=Sockets, Type A-side [ Female, Male]=Female connector axial, Mounting options [e.g. front/back panel mounting etc.]=Back panel mounting, panel thickness 2,2 mm, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin, Screw connection [e.g. PG9, M16 etc.]=M12x1, Locking type=M12 Bayonet/screwable, IP range A-side=IP67

Style	Sockets
Bus systems	Industrial Ethernet
Size A-side	M12x1
Design	Sockets
Type A-side [ Female, Male]	Female connector axial
Mounting options [e.g. front/back panel mounting etc.]	Back panel mounting, panel thickness 2,2 mm
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin
Screw connection [e.g. PG9, M16 etc.]	M12x1
Locking type	M12 Bayonet/screwable
IP range A-side	IP67
min. working temperature	-40° C
max. working temperature	+85° C
Shielding	Shielded

Amphenol Conec

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

TC Componentes te ofrece un profundo conocimiento técnico y la capacidad de brindar soluciones personalizadas.

Sabemos que el vasto catálogo de Amphenol puede ser abrumador, y nuestra colaboración en cada paso simplifica la búsqueda del conector adecuado. Si Amphenol no tiene lo que necesitas, te diremos dónde encontrarlo.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

En definitiva, ofrecemos soporte técnico avanzado, gestión eficiente de entregas y asesoría personalizada para que tu proyecto se ejecute sin errores y en el menor tiempo posible.

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

Atendemos proyectos de fabricantes de equipos electrónicos en sectores como energía renovable, automoción, transporte, automatización industrial, maquinaria agrícola y equipos médicos.

Nos especializamos en soluciones precisas y fiables para diseños complejos, ofreciendo asesoría personalizada y soporte técnico avanzado.

Nuestros servicios están dirigidos a empresas que valoran la alta calidad, la eficiencia y la capacidad de personalización de los productos de Amphenol para garantizar que cada componente cumpla con las exigencias específicas de su aplicación.

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

Los productos de Amphenol Industrial se utilizan frecuentemente en aplicaciones de energía renovable, automoción, transporte ferroviario y naval. También son esenciales en automatización industrial, maquinaria agrícola y equipos médicos.

Su robustez y fiabilidad los hacen ideales para sistemas de tráfico, vehículos eléctricos, equipos pesados y almacenamiento de energía donde se requieren conexiones de alta calidad y resistencia en entornos exigentes.

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial porque afecta directamente a la fiabilidad y el rendimiento del sistema. Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando la integridad del diseño.

En TC Componentes minimizamos estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

¿Hacéis muestras gratuitas de los productos de Amphenol?

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

Por eso, en la mayoría de casos ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar compras a gran escala.

No obstante, de forma puntual cobramos por muestras que requieren diseños muy personalizados o que soportan costes de producción por encima de la media.

¿Cuáles son los plazos de entrega de los productos de Amphenol?

En TC Componentes trabajamos para encontrar las soluciones logísticas más eficaces, como mantener stocks de seguridad o realizar envíos regulares. De esta manera nos aseguramos de que los plazos de entrega sean rápidos y eficientes.

En el caso de productos personalizados los tiempos de entrega pueden variar, pero siempre buscamos minimizar las demoras.

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico. Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

Sockets de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

Catálogo de componentes Amphenol Conec - Sockets (Página 1 de 4)

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

Sockets de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

Circular Connectors Sensor Actor Line > Sockets

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance