D-SUB Combination de Amphenol Conec

Catálogo de productos

Tenemos la solución ideal para ti

TC Componentes soluciones de electrónica industrial

TC Componentes: distribuidor de Amphenol en España

Te acompañamos en el diseño de tu producto

Con millones de opciones en el catálogo de Amphenol, elegir el conector correcto es todo un reto.

En TC Componentes navegamos la complejidad por ti.

Tanto si buscas confirmar tus ideas como obtener muestras, conocer precios o realizar pruebas, estamos a tu lado en cada paso del camino.

Somos especialistas en facilitar el proceso de diseño y minimizar errores. Esto significa que nos aseguramos de que encuentres el conector más óptimo para tu aplicación específica.

Reducimos la complejidad

Orientación técnica individualizada para elegir el conector correcto.

Soluciones a medida

Amplia gama de soluciones fiables y alta calidad.

Proveedor Fiable

Soporte técnico avanzado y soluciones de diseño a medida.

En el año 2023 entregamos más de 13 MILLONES de conectores

Catálogo de componentes Amphenol Conec - D-SUB Combination (Página 9 de 12)

Fabricante

Amphenol Conec

D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is done by using different contact types without having to change the shape, size and installation dimensions of the connector itself. By using high-current contacts, the power supply of the device can be realized without an additional interface for the power supply. High-voltage contacts allow operating voltages of up to 2.8 kV.

Fast signal transmission over shielded coaxial lines is achieved with the use of special coaxial contacts. A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series.
In all variants, different combinations with signal, high current, high voltage or coaxial contacts are possible. The combination of different contact types offers interesting possibilities to save space and costs in the interface area. The connectors are always supplied with signal contacts, except for the crimp version. The high-current, high-voltage and coaxial contacts can be ordered separately or can be mounted in the connector at the factory.

Codigo

Nombre

Características

Fabricante

PDFs

3047W1PAR69F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded bolt, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder pin straight, Termination coax contact=Crimp / crimp angled, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=1000 V, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR69F40X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 2,30mm, Hardware options mating side=Threaded bolt, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder pin straight, Termination coax contact=Crimp / crimp angled, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=1000 V, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR69F40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded bolt
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR69C20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder pin straight, Termination coax contact=Crimp / crimp angled, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=1000 V, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR69C20X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder pin straight
Termination coax contact	Crimp / crimp angled
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	1000 V
Dielectric with standing voltage coaxial	750 V
Working voltage power	250 V
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	20 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR76A30X

D-SUB Combination Standard

Hardware options termination side=Threaded Insert, PCB fastening=PCB-Clip, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR76A30X

D-SUB Combination Standard

Hardware options termination side	Threaded Insert
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR76A50X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR76A50X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR76E20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR76E40X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 2,30mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1SAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3027W2PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3024W7PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3036W4PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3043W2PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3047W1PAR76E40X

D-SUB Combination Standard

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 2,30mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3005W1SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3007W2SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3011W1SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3009W4SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W3SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W2SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3021W1SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3013W6SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3017W5SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

321WA4SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

3025W3SAR76F20X

D-SUB Combination Standard

Hardware options termination side=Threaded rear spacer, PCB fastening=PCB-Clip 1,60mm, Hardware options mating side=Threaded insert, Thread type=UNC 4-40, Termination signal [e.g. clamp, crimp, solder, SMT]=Solder pin straight, Termination power contact=Solder cup, Termination coax contact=Solder pin straight, Dielectric with standing voltage signal=1000 V, Dielectric with standing voltage power=707 V DC, Dielectric with standing voltage coaxial=750 V

Hardware options termination side	Threaded rear spacer
PCB fastening	PCB-Clip 1,60mm
Hardware options mating side	Threaded insert
Thread type	UNC 4-40
Termination signal [e.g. clamp, crimp, solder, SMT]	Solder pin straight
Termination power contact	Solder cup
Termination coax contact	Solder pin straight
Dielectric with standing voltage signal	1000 V
Dielectric with standing voltage power	707 V DC
Dielectric with standing voltage coaxial	750 V
Working voltage power	100 V DC
Working voltage coaxial	250 V
IP rating	IP 20
Current rating power	10 A
Impedance coax	50 Ohm
Frequency range	0- 2 Ghz
min. working temperature	-55° C
max. working temperature	+125° C
Quality class	Quality class 3
Mating cycles	50
Shell material	Steel
Shell plating	Tin

Amphenol Conec

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

TC Componentes te ofrece un profundo conocimiento técnico y la capacidad de brindar soluciones personalizadas.

Sabemos que el vasto catálogo de Amphenol puede ser abrumador, y nuestra colaboración en cada paso simplifica la búsqueda del conector adecuado. Si Amphenol no tiene lo que necesitas, te diremos dónde encontrarlo.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

En definitiva, ofrecemos soporte técnico avanzado, gestión eficiente de entregas y asesoría personalizada para que tu proyecto se ejecute sin errores y en el menor tiempo posible.

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

Atendemos proyectos de fabricantes de equipos electrónicos en sectores como energía renovable, automoción, transporte, automatización industrial, maquinaria agrícola y equipos médicos.

Nos especializamos en soluciones precisas y fiables para diseños complejos, ofreciendo asesoría personalizada y soporte técnico avanzado.

Nuestros servicios están dirigidos a empresas que valoran la alta calidad, la eficiencia y la capacidad de personalización de los productos de Amphenol para garantizar que cada componente cumpla con las exigencias específicas de su aplicación.

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

Los productos de Amphenol Industrial se utilizan frecuentemente en aplicaciones de energía renovable, automoción, transporte ferroviario y naval. También son esenciales en automatización industrial, maquinaria agrícola y equipos médicos.

Su robustez y fiabilidad los hacen ideales para sistemas de tráfico, vehículos eléctricos, equipos pesados y almacenamiento de energía donde se requieren conexiones de alta calidad y resistencia en entornos exigentes.

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial porque afecta directamente a la fiabilidad y el rendimiento del sistema. Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando la integridad del diseño.

En TC Componentes minimizamos estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

¿Hacéis muestras gratuitas de los productos de Amphenol?

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

Por eso, en la mayoría de casos ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar compras a gran escala.

No obstante, de forma puntual cobramos por muestras que requieren diseños muy personalizados o que soportan costes de producción por encima de la media.

¿Cuáles son los plazos de entrega de los productos de Amphenol?

En TC Componentes trabajamos para encontrar las soluciones logísticas más eficaces, como mantener stocks de seguridad o realizar envíos regulares. De esta manera nos aseguramos de que los plazos de entrega sean rápidos y eficientes.

En el caso de productos personalizados los tiempos de entrega pueden variar, pero siempre buscamos minimizar las demoras.

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico. Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

D-SUB Combination de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

Catálogo de componentes Amphenol Conec - D-SUB Combination (Página 9 de 12)

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

D-SUB Combination de Amphenol Conec

TC Componentes: distribuidor de Amphenol en España

D-SUB Connectors > D-SUB Combination

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Qué diferencia a TC Componentes como distribuidor de Amphenol?

¿Cuáles son las aplicaciones más frecuentes de los productos de Amphenol Industrial?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Amphenol?

¿Cuáles son los plazos de entrega de los productos de Amphenol?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance