FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly de Samtec

Catálogo de productos

Tenemos la solución ideal para ti

TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

Personalización extrema
con millones de combinaciones posibles

Asesoramiento técnico
para elegir el conector perfecto

Entrega rápida
sin pedidos mínimos

300.000 coches eléctricos funcionan gracias a nuestros conectores

Catálogo de componentes Samtec - FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly (Página 16 de 36)

Fabricante

Samtec

Ir a la pagina: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Flexible Stacking

Align the QR code within the frame to scan.

IDC Cable Systems

Tiger Eye™ IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch.

.050" Pitch IDC Terminals, Sockets & Connectors

These .050" pitch IDC terminals, sockets, and connectors feature our high-reliability Tiger Eye™ contacts and a variety of rugged options.

FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

.050" (1.27 mm) pitch
All common pin counts from 4 to 25
High-reliability Tiger Eye™ contacts
Mating shrouded terminal strips and ejector headers
Optional strain relief
Polarization key
Wide variety of wiring options including reverses, daisy chains, etc.

Codigo

Nombre

Características

Fabricante

PDFs

FFSD-10-D-27.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.56-01-N-D04

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 4.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	4.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-27.56-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.60-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.60-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-27.60-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.35-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.60-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-28.74-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-29.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-29.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-29.56-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-30.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-30.00-01-N-D15-O

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 15.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, -O

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	15.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	-O

Samtec

FFSD-10-D-30.00-01-N-D15-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 15.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	15.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-30.00-01-N-D26

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 26.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	26.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-30.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-30.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-31.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-31.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-31.01-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-31.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-32.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-32.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-32.51-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-32.90-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-33.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-33.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-34.05-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-34.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-34.51-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-34.65-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-35.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-35.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-35.43-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-35.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-N-D12

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 12.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	12.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-36.00-01-N-D18-M

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 18.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, -M, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	18.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	-M
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-N-RW-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-36.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-37.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-37.40-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-37.80-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-38.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-38.25-01-N-D17

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 17.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	17.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-38.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-39.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-39.37-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-39.37-01-N-RN2

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, -RN2, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	-RN2
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-39.37-01-N-RN2-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, -RN2, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	-RN2
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-39.40-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-40.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-40.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-40.00-01-N-D20

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 20.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	20.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-40.00-01-N-D25

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 25.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	25.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-40.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-40.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-41.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-41.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-S-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -S, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-S
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.00-01-S-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -S, Not Selected, -10, -D, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	-S
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-42.60-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-43.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-43.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-43.00-01-S-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -S, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-S
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-43.30-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-44.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-44.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-45.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-46.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-47.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-48.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-48.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-48.00-01-N-D12

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 12.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	12.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-48.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-49.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-50.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-50.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-50.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-51.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-51.20-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-54.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-55.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-56.12-01-N-D04

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 4.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	4.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-59.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-59.08-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-60.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-60.00-01-N-D12

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 12.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	12.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-60.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-61.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-61.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-63.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-63.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-65.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-70.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-72.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-72.00-01-N-D06

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 6.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	6.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-72.00-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-72.00-01-N-RN2

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, -RN2, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	-RN2
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-72.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-72.24-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-74.30-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-75.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-75.12-01-N-D04

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 4.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	4.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-75.25-01-N-R

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., -R, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	-R
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-78.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-78.74-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-78.74-01-N-D59

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 59.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	59.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-78.80-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-79.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-80.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-80.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-84.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-90.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-96.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-96.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-99.00-01-F-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, -SR, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	-SR
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-99.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-99.00-01-N-D19

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 19.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	19.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-D-99.00-01-N-D72-O

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 72.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, -O

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	72.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	-O

Samtec

FFSD-10-D-99.99-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Selected, -10, -D, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Selected
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-D-99.99-01-N-D24

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -D, Not Selected, 24.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Selected, Not Selected

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-D
Reverse Wiring	Not Selected
Daisy Chain	24.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Selected
Reverse Polarization Notch	Not Available
Middle Reverse	Not Selected
Outside Reverse	Not Selected

Samtec

FFSD-10-S-01.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-02.20-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.75-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.76-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-02.80-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-03.15-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.25-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.90-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.93-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.94-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-03.95-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-04.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-04.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-04.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-04.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-04.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-04.70-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-05.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.90-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-05.91-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.00-01-F-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, -F, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	-F
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-06.48-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-06.50-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-07.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-07.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-07.87-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-07.88-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-07.90-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-08.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-08.00-01-N-RN1

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, -RN1, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	-RN1
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-08.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-08.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-08.66-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-09.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-09.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-09.84-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-10.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-10.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, -RW, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Available, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	-RW
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Available
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-10.00-01-N-SR

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-10.25-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-100.00-01-N-RW

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-11.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-11.80-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-11.81-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

FFSD-10-S-1181-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Samtec

FFSD-10-S-12.00-01-N

.050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

-01, Standard, Not Available, -10, -S, Not Selected, 0.0, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Available, Not Selected, Not Available, Not Available

Lead Style	-01
Plating Options	Standard
Strain Relief	Not Available
No. of Positions	-10
End Assembly	-S
Reverse Wiring	Not Selected
Daisy Chain	0.0
Daisy Chain Note	Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reversed	Not Available
Reverse Polarization Notch	Not Selected
Middle Reverse	Not Available
Outside Reverse	Not Available

Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly de Samtec

TC Componentes es distribuidor de Samtec en España y Portugal

Catálogo de componentes Samtec - FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly (Página 16 de 36)

Flexible Stacking

IDC Cable Systems

.050" Pitch IDC Terminals, Sockets & Connectors

FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Samtec?

¿Cuáles son los plazos de entrega de los productos de Samtec?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

Conectores

Electrónica

Electricidad y comunicaciones

Servicios

Nuestras marcas

Electrónica industrial y automatización

Transporte, aeroespacial y defensa

Electrónica de consumo, telecom y medicina

Energía, renovables y distribución eléctrica

FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly de Samtec

TC Componentes es distribuidor de Samtec en España y Portugal

Flexible Stacking > IDC Cable Systems > .050" Pitch IDC Terminals, Sockets & Connectors > FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Flexible Stacking

IDC Cable Systems

.050" Pitch IDC Terminals, Sockets & Connectors

FFSD - .050" Low Profile Tiger Eye™ IDC Ribbon Cable Assembly

Respondemos a todo lo que quieres saber (y nadie más responde)

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

¿Por qué es importante elegir bien un conector para el diseño global?

¿Hacéis muestras gratuitas de los productos de Samtec?

¿Cuáles son los plazos de entrega de los productos de Samtec?

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Contáctanos

Contáctanos directamente

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance