TC Componentes es distribuidor de Samtec en España y Portugal
Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).
Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.
1
Personalización extrema
con millones de combinaciones posibles
2
Asesoramiento técnico para elegir el conector perfecto
3
Entrega rápida
sin pedidos mínimos
300.000 coches eléctricos funcionan gracias a nuestros conectores
Catálogo de componentes Samtec - HCSD - IDC Socket and Terminal Cable Assemblies, 0.100" Pitch (Página 3 de 17)
Tiger Eye™ IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch.
.100" Pitch IDC Terminals & Sockets (2.54 mm)
These .100" pitch IDC terminals and sockets range from 2 to 36 pins per row, feature a low profile slim design, and come in a variety of wiring configurations
HCSD - IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
.100" (2.54 mm) pitch
Dual beam contacts mate with .025" (0.635 mm) square posts
Gray and color coded cable
Mating shrouded terminal strips and ejector headers
Polarization key
Wide variety of wiring options including reverses, daisy chains, etc.
Most common pin counts from 10 to 40
Codigo
Nombre
Características
Fabricante
PDFs
HCSD-05-D-08.00-01-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-08.00-01-T
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-08.00-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-08.00-01-T-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-08.00-01-T-G-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-08.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.00-01-T-N-G-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.25-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.50-01-T-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-08.66-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-09.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-09.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01-N-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.50-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-09.50-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-09.75-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-G-D02-O
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, O, Not Selected, Not Selected, 2.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
O
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
2.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-G-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-T
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-T-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-T-N-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.00-01-T-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.25-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.50-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-10.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.50-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-10.50-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-11.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.40-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.40-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.50-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.50-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.80-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.80-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.81-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-11.81-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-118.11-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
Samtec
HCSD-05-D-12.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-12.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-12.00-01-G-P09
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, 09, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
09
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-12.00-01-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-12.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-12.00-01-N-D06
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Selected, Not Selected, Not Selected, 6.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
Not Selected
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
6.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-12.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-12.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-12.00-01-T
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-12.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-12.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-13.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-13.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-13.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-13.80-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-14.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.00-01-N-G-D06-O
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, O, Not Selected, Not Selected, 6.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
O
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
6.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-14.75-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.0-01-N-G-P01-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
Samtec
HCSD-05-D-15.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-15.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-15.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.00-01-N-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.00-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-15.00-01-T-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-15.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.00-01-T-N-P01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, 01, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
01
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.55-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-15.60-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-15.75-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-157.48-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
Samtec
HCSD-05-D-16.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-16.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-16.00-01-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-16.00-01-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-16.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.50-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-16.80-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-17.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-17.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-17.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-17.50-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-17.72-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-18.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-18.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-N-G-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-18.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.00-01-T-N-G-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.20-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-18.50-01-N-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-19.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-19.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-19.70-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-196.85-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
Samtec
HCSD-05-D-20.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-20.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-20.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-T
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-20.00-01-T-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-20.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-T-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-T-N-G-RW-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-20.00-01-T-N-RW
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, RW, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
RW
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-21.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-21.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-21.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-22.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-22.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-22.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-22.50-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-23.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-23.62-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-23.62-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-24.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-24.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01-N-G-D18
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Selected, Not Selected, Not Selected, 18.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
Not Selected
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
18.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01-N-P10
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, 10, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
10
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01-P09
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, 09, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
09
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-24.00-01-S02-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 2.0, S, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
2.0
Daisy Chain Connector Type
S
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-24.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-24.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-25.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-25.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-26.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-27.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-27.50-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-28.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-30.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-30.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-30.00-01-N-D15
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Selected, Not Selected, Not Selected, 15.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
Not Selected
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
15.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-30.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-30.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-31.50-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-31.50-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-32.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-32.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-32.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-33.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-33.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-34.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-35.50-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-36.00-01-D04
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Selected, Not Selected, Not Selected, 4.0, D, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
Not Selected
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
4.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-36.00-01-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, Non-standard option - Please contact SAMTEC: blank - no Notch
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
Non-standard option - Please contact SAMTEC: blank - no Notch
Samtec
HCSD-05-D-36.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01-N-G-D12
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Selected, Not Selected, Not Selected, Not Selected, 12.0, D, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Selected
Outside Connector Reversed
Not Selected
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
12.0
Daisy Chain Connector Type
D
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01-N-G-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01-T-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.00-01-T-N-R
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., R, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-36.25-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-38.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-39.50-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-40.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-40.00-01-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-40.00-01-T-N-G
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, T, G, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
T
Wire Color Code
G
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Polarized Mating
Not Selected
Daisy Chain Option
0.0
Daisy Chain Connector Type
Not Available
Stripped & Tinned Option
Not Selected
Notch Polarization Option
-N
Samtec
HCSD-05-D-42.00-01-N
IDC Socket and Terminal Cable Assemblies, 0.100" Pitch
01, Standard, Standard Color Coded Cable, 05, D, Not Selected, Assembly Length - Must be at least 2 inches greater than Daisy Chain., Not Selected, Not Available, Not Available, Not Selected, Not Selected, 0.0, Not Available, Not Selected, -N
Lead Style
01
Plating Options
Standard
Wire Color Code
Standard Color Coded Cable
No. of Positions
05
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
TC Componentes es proveedor industrial de este producto. Podemos facilitarte muestras, ayudarte en tu diseño y proporcionar un suministro estable al mejor precio.
Ficha Técnica
Descarga de catálogos
Respondemos a todo lo que quieres saber (y nadie más responde)
1
¿Qué diferencia a TC Componentes como distribuidor de Samtec?
TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.
Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.
Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.
Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.
Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.
2
¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?
Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.
Nos enfocamos en dos tipos de clientes:
– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.
– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.
3
¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?
Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.
Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.
4
¿Por qué es importante elegir bien un conector para el diseño global?
Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.
Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.
En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.
5
¿Hacéis muestras gratuitas de los productos de Samtec?
Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.
Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.
6
¿Cuáles son los plazos de entrega de los productos de Samtec?
Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.
En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.
7
¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?
Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.
Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.
Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.
