Samtec – conectores de alta velocidad

IDMD - Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch de Samtec

Catálogo de productos

TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

1

Personalización extrema
con millones de combinaciones posibles

2

Asesoramiento técnico
para elegir el conector perfecto

3

Entrega rápida
sin pedidos mínimos

Catálogo de componentes Samtec
IDMD - Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch (Página 12 de 18)

Fabricante: Samtec
Catálogo online de Samtec > Flexible Stacking > IDC Cable Systems > .100" Pitch IDC Terminals & Sockets (2.54 mm) > IDMD - Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch

Flexible Stacking

Align the QR code within the frame to scan.

IDC Cable Systems

Tiger Eye™ IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch.

.100" Pitch IDC Terminals & Sockets (2.54 mm)
These .100" pitch IDC terminals and sockets range from 2 to 36 pins per row, feature a low profile slim design, and come in a variety of wiring configurations
IDMD - Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch
IDMD - Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch
  • .100" (2.54 mm) pitch
  • Any pin count from 4 to 64
  • Double ended with termination to socket strip available
  • Gray and color coded cable
  • Wide variety of wiring options including reverses, daisy chains, etc.
Código Nombre Características Fabricante Docs
IDMD-13-T-02.00-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.00-T-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.01 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.36 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.375-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-02.38-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.40-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.40-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-A Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-C-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-C-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.50-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-02.75-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-C-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-G-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-T-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.00-T-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.05-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.25 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.50 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.50-C-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.75 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.75-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-03.75-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-A-P16 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating16
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-A-P16-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-04.00-C-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-G-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-P05 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating05
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.00-T-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.25-C-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.25-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.30-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.50 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-04.95-D02-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained2.0
Daisy Chained Connector TypeD
Samtec
IDMD-13-T-05.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-C-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-P26 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-P26-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating26
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.00-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.25 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.40-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-05.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-A-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-A-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-C-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-C-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-G-RW-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-T-P23 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized Mating23
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.00-T-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-06.50-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-07.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-07.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-07.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-07.87 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-07.90 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-08.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-08.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-08.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-08.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-08.00-T-P01-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-08.10-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-09.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-09.00-T-P09-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-09.00-T-P17-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-09.84 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.00-T-G-RW-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-10.50-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-11.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-12.00-A Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-12.00-C-G-D04-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained4.0
Daisy Chained Connector TypeD
Samtec
IDMD-13-T-12.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-12.00-G-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-12.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-14.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-14.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-14.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-15.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-16.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-18.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-18.00-C-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-19.68-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-20.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-20.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-20.00-T-P10-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-20.00-T-P18-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-13-T-24.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-26.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-30.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-13-T-36.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=13, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions13
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-02.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-02.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-02.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-03.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-03.50-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-04.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-05.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-05.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-06.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-12.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-12.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-D-20.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-02.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-02.00-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-02.25-ST8 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionST8
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-02.25-ST8-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Samtec
IDMD-14-S-04.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-04.00-T-G-ST4 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsT
Wire Color CodeG
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionST4
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-06.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-06.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-08.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-08.00-ST8 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionST8
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-09.50-RW Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-10.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-12.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-24.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-48.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-S-56.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyS
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Available
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Selected
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.00-T-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-02.25-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-03.75-T-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-04.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-04.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-04.50-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-05.00-A Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-06.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-06.00-T-G-RW-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-08.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-09.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-09.00-G-S06-M Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=M, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedM
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained6.0
Daisy Chained Connector TypeS
Samtec
IDMD-14-T-10.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-10.00-C Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=C, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsC
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-10.00-T Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-12.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-15.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-15.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-17.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-18.00-G-D06-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained6.0
Daisy Chained Connector TypeD
Samtec
IDMD-14-T-20.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-20.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-24.00-A Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=A, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsA
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-24.00-G-S02 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Selected, Outside Connector Reversed=Not Selected, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Selected
Outside Connector ReversedNot Selected
Breakout OptionNot Available
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained2.0
Daisy Chained Connector TypeS
Samtec
IDMD-14-T-30.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-60.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-14-T-72.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=14, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions14
End AssemblyT
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Selected
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-02.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-02.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-02.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-03.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-03.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-03.75 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-04.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-04.00-G-S02-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Available
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Available
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained2.0
Daisy Chained Connector TypeS
Samtec
IDMD-15-D-04.00-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-04.00-T-G-RW-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-04.50-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-06.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-06.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-06.00-G-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-07.00-G Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-10.00-T-G-RW-R Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=T, Wire Color Code=G, No. of Positions=15, End Assembly=D, Reverse Wiring=RW, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsT
Wire Color CodeG
No. of Positions15
End AssemblyD
Reverse WiringRW
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorR
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-12.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-16.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec
IDMD-15-D-18.00 Slim Body Double-Row IDC Male Assemblies, 0.100" Pitch Plating Options=Standard - Selective Gold, Wire Color Code=Standard Color Coded Cable, No. of Positions=15, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available, Outside Connector Reversed=Not Available, Breakout Option=Not Selected
Plating OptionsStandard - Selective Gold
Wire Color CodeStandard Color Coded Cable
No. of Positions15
End AssemblyD
Reverse WiringNot Selected
Daisy Chain NoteAssembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse ConnectorNot Selected
Middle Connector ReversedNot Available
Outside Connector ReversedNot Available
Breakout OptionNot Selected
Polarized MatingNot Available
Stripped & Tinned OptionNot Available
Daisy Chained0.0
Daisy Chained Connector TypeNot Available
Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

1

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

2

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

3

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

4

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

5

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

6

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

7

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial  a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

TC Componentes – Mayorista de electrónica industrial
Certificado ISO 9001 — TC Componentes

Trabajamos con los mejores fabricantes mundiales y te traemos los componentes electrónicos que necesitas para que tu proyecto sea un éxito.

Encuentra tu componenteEncuentra tu componente

TC COMPONENTES S.L.U.
Camí de Can Calders 6, local 12G
08173 SANT CUGAT DEL VALLÉS
Teléfono: (34) 93 590 2830
Email: infoweb@tc-componentes.es

(c) 2026 TC Componentes S.L. Todos los derechos reservados. Diseño web: The Art of Ecommerce

Área de clientes

infoweb@tc-componentes.es

(34) 93 590 28 30

Pide presupuesto

×
Cargando...
×
Cargando...
Go to Top