Samtec – conectores de alta velocidad

LPHS - .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip de Samtec

Catálogo de productos

TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

1

Personalización extrema
con millones de combinaciones posibles

2

Asesoramiento técnico
para elegir el conector perfecto

3

Entrega rápida
sin pedidos mínimos

Catálogo de componentes Samtec
LPHS - .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip (Página 1 de 2)

Fabricante: Samtec
Catálogo online de Samtec > Rugged / Power > Power Systems > EXTreme LPHPower™ 30 Amp Power Connectors > LPHS - .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip

Rugged / Power

Align the QR code within the frame to scan.

  • UltraRugged: Extreme High Mating Cycles; Rugged MIL-DTL Materials; Testing for Extreme/Harsh Applications
  • FlexPower: 3 to 60 Amps; Configurability of Power and Signal; Space-Saving Form Factor
  • RuggedContact System: 1000+ Mating Cycles; Tiger Eye™ Heat-Treated BeCu Contacts; Multiple Points of Contact for High-Reliability
  • RuggedSignal Integrity: High Speeds to 56 Gbps PAM4; Edge Rate® Contact Design Increases Wear Life; Expertise in Signal Integrity Design & Analysis
  • Options for high-reliability, high-retention and high-cycle life
  • Tiger Eye™ Contact System
  • Tiger Eye™ Contact System
  • Edge Rate® Contact System
  • Edge Rate® Contact System
  • Samtec's rugged/power products are tested to or beyond industry standards to ensure quality and performance in rugged applications.

Power Systems

Samtec’s flexible power solutions are available as high power only or power/signal combinations up to 60 Amps with high-density power blades in small form factors. Board-to-board and discrete wire cable assemblies available. With up to 18 Amps/blade in an ultra micro footprint, mPOWER® connectors provide incredible design flexibility with vertical or right-angle orientations, stack heights from 5 to 20 mm and mating cable assemblies for board-to-board, cable-to-board and cable-to-cable applications. Micro Mate® and Power Mate® systems feature individually shrouded contacts for electrical and mechanical protection. High power solutions up to 60 Amps/blade feature high density blades in a small form factor, vertical or right-angle orientations, and power-only, power/signal combinations or split power options.

EXTreme LPHPower™ 30 Amp Power Connectors
EXTreme LPHPower™ 30 amp power connectors are extremely low profile at 7.5 mm, and feature double stacked power blades for high density applications.
LPHS - .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip
LPHS - .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip
  • Low 7.50 mm profile (right-angle)
  • Vertical press-fit or right-angle
  • .050" (1.27 mm) pitch signal; .098" (2.50 mm) pitch power
  • 24 or 32 signal contacts
  • 4 or 8 power positions
  • Current rating: 30 A max
  • Voltage rating: 250 VAC/354 VDC max
Código Nombre Características Fabricante Docs
LPHS-00-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=00, Signal Positions (Total)=16
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)00
Signal Positions (Total)16
Samtec
LPHS-00-20-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=00, Signal Positions (Total)=20
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)00
Signal Positions (Total)20
Samtec
LPHS-00-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=00, Signal Positions (Total)=24
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)00
Signal Positions (Total)24
Samtec
LPHS-00-24-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=00, Signal Positions (Total)=24
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)00
Signal Positions (Total)24
Samtec
LPHS-00-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=00, Signal Positions (Total)=32
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)00
Signal Positions (Total)32
Samtec
LPHS-02-00-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=00
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)00
Samtec
LPHS-02-00-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=00
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)00
Samtec
LPHS-02-12-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-12-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=12
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)12
Samtec
LPHS-02-16-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-16-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)16
Samtec
LPHS-02-20-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)20
Samtec
LPHS-02-20-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)20
Samtec
LPHS-02-20-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)20
Samtec
LPHS-02-20-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)20
Samtec
LPHS-02-24-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-24-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)24
Samtec
LPHS-02-28-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=28
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)28
Samtec
LPHS-02-32-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-02-32-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-02-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-02-32-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-02-32-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-02-32-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=02, Signal Positions (Total)=32
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)02
Signal Positions (Total)32
Samtec
LPHS-04-00-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=00
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)00
Samtec
LPHS-04-00-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=00
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)00
Samtec
LPHS-04-12-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-12-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)12
Samtec
LPHS-04-16-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-16-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)16
Samtec
LPHS-04-20-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-20-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=20
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)20
Samtec
LPHS-04-24-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-24-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=24
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)24
Samtec
LPHS-04-28-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=28
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)28
Samtec
LPHS-04-28-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=28
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)28
Samtec
LPHS-04-28-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=28
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)28
Samtec
LPHS-04-32-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-04-32-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=04, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)04
Signal Positions (Total)32
Samtec
LPHS-06-00-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=00
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)00
Samtec
LPHS-06-00-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=00
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)00
Samtec
LPHS-06-12-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-S-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-12-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=12
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)12
Samtec
LPHS-06-16-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-16-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)16
Samtec
LPHS-06-20-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)20
Samtec
LPHS-06-20-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)20
Samtec
LPHS-06-20-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)20
Samtec
LPHS-06-20-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)20
Samtec
LPHS-06-20-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)20
Samtec
LPHS-06-24-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)24
Samtec
LPHS-06-24-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)24
Samtec
LPHS-06-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)24
Samtec
LPHS-06-24-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)24
Samtec
LPHS-06-24-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)24
Samtec
LPHS-06-28-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=28
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)28
Samtec
LPHS-06-32-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=06, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)06
Signal Positions (Total)32
Samtec
LPHS-06-32-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=06, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)06
Signal Positions (Total)32
Samtec
LPHS-06-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)32
Samtec
LPHS-06-32-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=06, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)06
Signal Positions (Total)32
Samtec
LPHS-08-00-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=00
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)00
Samtec
LPHS-08-00-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=00
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)00
Samtec
LPHS-08-12-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)12
Samtec
LPHS-08-12-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)12
Samtec
LPHS-08-12-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)12
Samtec
LPHS-08-12-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)12
Samtec
LPHS-08-16-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-16-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)16
Samtec
LPHS-08-20-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)20
Samtec
LPHS-08-20-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)20
Samtec
LPHS-08-20-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)20
Samtec
LPHS-08-20-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)20
Samtec
LPHS-08-20-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)20
Samtec
LPHS-08-24-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-24-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=24
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)24
Samtec
LPHS-08-28-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=28
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)28
Samtec
LPHS-08-28-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=28
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)28
Samtec
LPHS-08-32-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-08-32-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=08, Signal Positions (Total)=32
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)08
Signal Positions (Total)32
Samtec
LPHS-10-00-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=00
Plating OptionL
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)00
Samtec
LPHS-10-00-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Not Available, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=00
Plating OptionS
Guide PostNot Available
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)00
Samtec
LPHS-10-12-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)12
Samtec
LPHS-10-12-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)12
Samtec
LPHS-10-12-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=12
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)12
Samtec
LPHS-10-12-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=12
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)12
Samtec
LPHS-10-16-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-S-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-S-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-S-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionS
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-16-S-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=16
Plating OptionS
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)16
Samtec
LPHS-10-20-L-RT2 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)20
Samtec
LPHS-10-20-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)20
Samtec
LPHS-10-20-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=20
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)20
Samtec
LPHS-10-20-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=20
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)20
Samtec
LPHS-10-24-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)24
Samtec
LPHS-10-24-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)24
Samtec
LPHS-10-24-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=24
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)24
Samtec
LPHS-10-24-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=24
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)24
Samtec
LPHS-10-24-S-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=S, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=24
Plating OptionS
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)24
Samtec
LPHS-10-32-L-RT1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)32
Samtec
LPHS-10-32-L-RT1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT1, Power Positions (Total)=10, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT1
Power Positions (Total)10
Signal Positions (Total)32
Samtec
LPHS-10-32-L-RT2-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=RT2, Power Positions (Total)=10, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionRT2
Power Positions (Total)10
Signal Positions (Total)32
Samtec
LPHS-10-32-L-VP1 .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=Non-standard option - Please contact SAMTEC: Not Selected, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=32
Plating OptionL
Guide PostNon-standard option - Please contact SAMTEC: Not Selected
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)32
Samtec
LPHS-10-32-L-VP1-GP .050" EXTreme LPHPower™ 30 Amp Signal/Power Combo Socket Strip Plating Option=L, Guide Post=GP, Tail Option=VP1, Power Positions (Total)=10, Signal Positions (Total)=32
Plating OptionL
Guide PostGP
Tail OptionVP1
Power Positions (Total)10
Signal Positions (Total)32
Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

1

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

2

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

3

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

4

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

5

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

6

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

7

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial  a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

TC Componentes – Mayorista de electrónica industrial
Certificado ISO 9001 — TC Componentes

Trabajamos con los mejores fabricantes mundiales y te traemos los componentes electrónicos que necesitas para que tu proyecto sea un éxito.

Encuentra tu componenteEncuentra tu componente

TC COMPONENTES S.L.U.
Camí de Can Calders 6, local 12G
08173 SANT CUGAT DEL VALLÉS
Teléfono: (34) 93 590 2830
Email: infoweb@tc-componentes.es

(c) 2026 TC Componentes S.L. Todos los derechos reservados. Diseño web: The Art of Ecommerce

Área de clientes

infoweb@tc-componentes.es

(34) 93 590 28 30

Pide presupuesto

×
Cargando...
×
Cargando...
Go to Top