TC Componentes es distribuidor de Samtec en España y Portugal
Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).
Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.
Personalización extrema
con millones de combinaciones posibles
Asesoramiento técnico
para elegir el conector perfecto
Entrega rápida
sin pedidos mínimos
300.000 coches eléctricos funcionan gracias a nuestros conectores
Catálogo de componentes Samtec
RF
Samtec offers complete RF interconnect solutions supporting traditional sub-6 GHz frequencies to 130 GHz microwave/mmWave frequencies (sub-Terahertz spectrum). Products include end-to-end RF cable assemblies, board connectors, cable connectors, adaptors and Samtec Original RF Solutions.
RF Cable Assemblies
Samtec offers a wide range of RF cable assemblies available with low-loss microwave / millimeter wave cable from .047 to .277, RG type cable (316, 174, 178, 58, 179, 6), 12G-SDI Belden cables, high-density ganged and Samtec-optimized varieties. Interface types include 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, SMA, SMPM, SMP, MCX, MMCX, BNC, High-Density BNC, MHF U.FL/W.FL, and more. RF Cable Solutionator® allows engineers to choose a connector and cable type, and create a final part number, in under a minute. Results include product specifications, pricing and availability, models and prints.
High-Performance RF Microwave Cable Assemblies
Phase and amplitude stable high-performance microwave cable assemblies designed to support extended frequency ranges for emerging applications.
50 Ohm RF Microwave Cables
High-frequency 18 to 110 GHz cable assemblies with low loss and semi-flexible microwave/millimeter wave cable from .047 to .277, high-density ganged and Samtec-optimized varieties with mix-and-match end options.
Low Frequency RF Cables
Standard off-the-shelf, traditional sub-6 GHz frequency cable assemblies with RG type cable (316, 174, 178, 58, 179, 6), 0.81 and 1.13 mm Micro High Frequency, 12G-SDI and Samtec optimized varieties with mix-and-match standard 50 and 75 ohm end options.
RF Connectors
RF connectors are available for cable-to-board or board-to-board, ganged and blind-mate applications. Interface types include 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, 3.50 mm, SSMA, SMA, SMPM, SMP, TNCA, N Type, MCX, MMCX, SMB, TNC, BNC, High-Density BNC, in-series or between-series adaptors, and many more. Quickly and easily build RF cable assemblies using Samtec's RF Cable Solutionator® - choose a connector and cable type to create a final part number.
1.00 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 110 GHz
1.35 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 90 GHz
1.85 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 67 GHz
2.40 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 50 GHz
2.92 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 40 GHz
3.50 mm Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 34 GHz
SSMA Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 34 GHz
SMA RF Connectors, 50 Ohm
Subminiature interconnects with screw-type coupling.
SMPM Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 65 GHz; single-port SMPM or multi-port ganged Magnum RF® solutions.
Threaded SMPM Precision RF, 50 Ohm
High-frequency Precision RF interconnects to 65 GHz
SMP3 Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 65 GHz
SMP Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 40 GHz
TNCA Precision RF Connectors, 50 Ohm
High-frequency Precision RF interconnects to 18 GHz
N Type Precision RF Connectors, 50 Ohm
Robust N Type interface with threaded coupling
BNC RF Connectors, 50 Ohm & 75 Ohm
75 Ohm and 50 Ohm BNC miniature quick connect/disconnect RF interfaces.
DIN 1.0/2.3 RF Connectors, 75 Ohm
75 ohm DIN 1.0/2.3 RF connectors have push-pull coupling and are designed for high-density applications.
High-Density RF Connectors, 75 Ohm
High-Density BNC RF connectors, 75 Ohm with 4x the density of standard BNC solutions.
MCX RF Connectors, 50 Ohm & 75 Ohm
Mini coax interconnects featuring a space-saving design which is approximately 30 percent smaller than SMBs.
MMCX RF Connectors, 50 Ohm & 75 Ohm
Micro-miniature interconnects with snap-on coupling.
SMB RF Connectors, 50 Ohm & 75 Ohm
Subminiature interconnects featuring snap-on coupling and a space-saving alternative to SMAs.
TNC RF Connectors, 50 Ohm
Threaded coupling interface in standard and reverse polarity.
Precision RF Between-Series Adaptors, 50 Ohm
High-frequency Precision RF between-series adaptors for 1.00 mm to 1.85 mm or SMPM to 2.92 mm connections.
RF Original Solutions
High-frequency and low-frequency RF products that are unique to Samtec. This includes Bulls Eye® for test and measurement, Magnum RF® multi-port blocks and cable assemblies, Flexible Waveguide for E-band, Ganged and Micro-Mini Systems, 100 Ohm Shielded Twisted Pair Assembly, IsoRate® high-isolation RF, and 75 Ohm or high-vibration MMCX solutions.
Bulls Eye® RF High-Performance Test
Compression interface, small footprint and high cycle count make Bulls Eye® ideal for high-performance testing applications to 130 GHz supporting 448 Gbps requirements.
Magnum RF® Ganged, Multi-Port, High-Frequency Connectors
Ganged, multi-port RF blocks and cable assemblies for millimeter wave applications. Ideal when space is limited and a high operating frequency is required.
Flexible Waveguide Original Solutions
Samtec’s new, high-frequency micro waveguide technology supports the demands of next generation millimeter wave systems. It uses a cable design allowing flexibility and a reduced size, yet also maintains loss performance similar to that of a traditional waveguide.
URSA® I/O Ultra Rugged Cable System
URSA® I/O features Hyper Claw™ hyperboloid-type contacts for extreme reliability and high mating cycles in ultra rugged applications with EMI protection.
Ganged Micro Scale RF Jacks, Plugs, and Cables
Samtec's ganged micro-miniature high-performance RF jacks, plugs, and cables are on a 5.00 mm pitch and available as board-to-board or cable-to-board systems.
Shielded Twisted Pair Cable System
High-speed shielded twisted pair cable assembly for 100 ohm applications.
IsoRate® High-Isolation RF Connectors and Cables
IsoRate® 50 ohm high-isolation RF connectors and cables offer substantial savings over traditional RF connectors at approximately half the cost.
Rugged, Blind Mate Modular Solutions to 110 GHz
Highly configurable, high-frequency RF ganged solution with blind mate module using size 20 or size 16 contacts, .047" cable assembly, or MT ferrule slot in a space saving, multi-port block.
Respondemos a todo lo que quieres saber (y nadie más responde)
Contáctanos
Contáctanos directamente
puedes contactar por teléfono, correo o email
Potencia en soluciones de electrónica industrial a tu alcance
O rellena el formulario
Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.
