TC Componentes es distribuidor de Samtec en España y Portugal
Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).
Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.
1
Personalización extrema
con millones de combinaciones posibles
2
Asesoramiento técnico para elegir el conector perfecto
3
Entrega rápida
sin pedidos mínimos
Catálogo de componentes Samtec TCMD - 2.00 mm IDC Ribbon Cable Assembly, Terminal (Página 8 de 14)
Tiger Eye™ IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch.
2mm Pitch IDC Connectors, Terminals, & Sockets
These 2mm pitch IDC connectors, terminals, and sockets feature our high-reliability Tiger Eye™ contacts, and feature a variety of rugged options.
TCMD - 2.00 mm IDC Ribbon Cable Assembly, Terminal
2.00 mm (.0787") pitch
All common pin counts from 4 to 25
Double ended with termination to socket strip available
Optional strain relief
Wide variety of wiring options including reverses, daisy chains, etc.
Código
Nombre
Características
Fabricante
Docs
TCMD-10-T-26.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-10-T-30.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-10-T-32.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-36.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-36.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-10-T-40.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-48.00-01-N-P10
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
10
Samtec
TCMD-10-T-48.00-01-N-P12
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
12
Samtec
TCMD-10-T-48.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-10-T-48.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-72.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-72.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-10-T-75.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-10-T-78.75-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=10, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
10
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-11-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-11-D-02.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-D-08.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-D-10.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-D-11.85-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-D-11.90-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-D-12.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-S-03.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-S-09.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-S-10.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-S-18.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-S-36.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=11, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
11
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-11-T-04.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-11-T-06.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-11-T-08.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-11-T-10.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-11-T-12.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-11-T-18.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-11-T-18.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=11, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
11
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-12-01-RF
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-12-D-02.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-02.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-02.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-02.50-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-03.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-03.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-03.50-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-03.93-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-04.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-04.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-04.00-01-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-12-D-04.08-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-04.75-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-04.80-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-05.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-05.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-05.50-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-06.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-06.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-06.50-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-07.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-07.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-07.40-01-RF-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=RF, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
RF
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-08.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-08.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-10.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-10.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-10.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-11.80-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-12.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-12.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-12.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-15.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-15.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-18.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-18.00-01-RF
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=RF, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
RF
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-18.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-19.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-20.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-20.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-20.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-22.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-24.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-24.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-25.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-25.60-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-40.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-50.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-D-99.00-01-RF
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=RF, Strain Relief=Not Selected, No. of Positions=12, End Assembly=D, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
RF
Strain Relief
Not Selected
No. of Positions
12
End Assembly
D
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-02.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-02.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-02.20-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-03.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-03.00-01-B12
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-12-S-03.00-01-RF
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=RF, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
RF
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-04.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-05.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-05.00-01-B12
2.00 mm IDC Ribbon Cable Assembly, Terminal
Samtec
TCMD-12-S-06.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-06.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-06.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-07.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-07.90-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-08.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-10.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-10.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-10.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-11.81-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-12.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-12.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-14.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-15.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-16.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-16.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-18.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-21.65-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-22.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-24.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-30.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-36.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-48.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-60.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-72.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-S-99.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=S, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Available, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
S
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Available
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Available
Polarized Mating
Not Available
Samtec
TCMD-12-T-02.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.00-01-F-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.16-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.30-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.50-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-02.50-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.00-01-N-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.20-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.50-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-03.50-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-F-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.20-01-F-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.80-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-04.80-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-F-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-N-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.00-01-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.50-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.50-01-F-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.51-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-05.91-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-06.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-06.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-06.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-06.00-01-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-06.70-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-07.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-07.00-01-N-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-07.00-01-N-RW-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-07.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-07.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01-F-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01-N-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-08.00-01-RW-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-09.05-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-09.50-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-09.90-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-10.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-10.00-01-F
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-10.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-10.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-11.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-11.81-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-12.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-12.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-12.00-01-N-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-12.00-01-N-RW-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-12.00-01-N-SR
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=SR, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
SR
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-13.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-13.00-01-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-14.00-01-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-15.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-15.00-01-F
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-15.00-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-15.75-01-N
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-16.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-16.00-01-F-N-R
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=F, Strain Relief=Not Available, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=R, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
F
Strain Relief
Not Available
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
R
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
N
Polarized Mating
Not Selected
Samtec
TCMD-12-T-16.00-01-RW
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=RW, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
RW
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
Reverse Connector
Not Selected
Middle Connector Reversed
Not Available
Outside Connector Reversed
Not Available
Breakout Option
Not Selected
Notch Option
Not Selected
Polarized Mating
Not Selected
Samtec
TCMD-12-T-18.00-01
2.00 mm IDC Ribbon Cable Assembly, Terminal
Lead Style=01, Plating Options=Tin Plating, Strain Relief=Not Selected, No. of Positions=12, End Assembly=T, Reverse Wiring=Not Selected, Daisy Chain=0, Daisy Chain Note=Assembly Length - Must be at least 2 inches greater than Daisy Chain., Reverse Connector=Not Selected, Middle Connector Reversed=Not Available
Lead Style
01
Plating Options
Tin Plating
Strain Relief
Not Selected
No. of Positions
12
End Assembly
T
Reverse Wiring
Not Selected
Daisy Chain
0
Daisy Chain Note
Assembly Length - Must be at least 2 inches greater than Daisy Chain.
TC Componentes es proveedor industrial de este producto. Podemos facilitarte muestras, ayudarte en tu diseño y proporcionar un suministro estable al mejor precio.
Ficha Técnica
Descarga de catálogos
Respondemos a todo lo que quieres saber (y nadie más responde)
1
¿Qué diferencia a TC Componentes como distribuidor de Samtec?
TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.
Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.
Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.
Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.
Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.
2
¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?
Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.
Nos enfocamos en dos tipos de clientes:
– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.
– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.
3
¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?
Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.
Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.
4
¿Por qué es importante elegir bien un conector para el diseño global?
Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.
Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.
En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.
5
¿Hacéis muestras gratuitas de los productos de Samtec?
Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.
Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.
6
¿Cuáles son los plazos de entrega de los productos de Samtec?
Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.
En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.
7
¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?
Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.
Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.
Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.
