TMMH-105-04-T-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 05, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 05, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-05-F-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 05, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-F-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 05, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-F-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 05, 05, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 05, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-05-G-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 05, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-G-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 05, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-G-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 05, 05, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-G-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 05, 05, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-L-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 05, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-05-L-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 05, 05, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-105-05-L-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 05, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-L-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 05, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-L-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 05, 05, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-S-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 05, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-05-S-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 05, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-S-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 05, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-105-05-T-5
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 05, 5, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-105-05-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-05-T-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 05, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-105-06-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 05, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-06-F-D-RC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 05, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, RC
Samtec
TMMH-105-06-F-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 05, 06, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-105-06-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 05, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-06-L-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 05, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-105-06-S-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 05, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-105-06-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-105-06-T-D-RC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, RC
Samtec
TMMH-105-06-T-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 05, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-F-6
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, 6, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-F-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-F-D-RA-001
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, D, Not Available, Not Available, Not Available, RA, 001, Not Available
Samtec
TMMH-106-01-F-D-RA-012
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, D, Not Available, Not Available, Not Available, RA, 012, Not Available
Samtec
TMMH-106-01-F-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, F, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, F, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-F-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-F-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-F-T-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 01, T, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-FM-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, FM, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-FM-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, FM, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-G-D-009
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, D, Not Available, Not Available, Not Available, Straight, 009, Not Selected
Samtec
TMMH-106-01-G-D-012
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, D, Not Available, Not Available, Not Available, Straight, 012, Not Selected
Samtec
TMMH-106-01-G-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-G-D-RA-012
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, D, Not Available, Not Available, Not Available, RA, 012, Not Available
Samtec
TMMH-106-01-G-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-DV-001
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, 001, Not Available
Samtec
TMMH-106-01-G-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-DV-A-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-G-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-G-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-H-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, H, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-L-5-001
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, 5, Not Available, Not Available, Not Available, Straight, 001, Not Available
Samtec
TMMH-106-01-L-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-L-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, L, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, L, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-A-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-LC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 01, DV, Not Available, LC, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-LC-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 06, 01, DV, Not Available, LC, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, L, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-L-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-L-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-L-T-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 01, T, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-LM-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, LM, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-LM-D-RA-005
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, LM, 06, 01, D, Not Available, Not Available, Not Available, RA, 005, Not Available
Samtec
TMMH-106-01-LM-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, LM, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-S-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, S, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, S, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, S, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-S-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 06, 01, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-S-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-SM-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, SM, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-SM-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, SM, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-01-T-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-T-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 06, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 06, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, T, 06, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-DV-LC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 06, 01, DV, Not Available, LC, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, T, 06, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-01-T-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-01-T-T-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 01, T, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-01-TM-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, TM, 06, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-04-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 04, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-04-F-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 04, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 04, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 04, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-A-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 04, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 04, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, F, 06, 04, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 04, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-F-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 04, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-04-G-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 04, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-04-G-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-G-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 04, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-04-L-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 04, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-04-L-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 04, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-04-L-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-L-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 04, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-L-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 06, 04, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-LM-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, LM, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-S-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 04, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-S-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, S, 06, 04, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-04-SM-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, SM, 06, 04, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-04-SM-D-RA-005
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, SM, 06, 04, D, Not Available, Not Available, Not Available, RA, 005, Not Available
Samtec
TMMH-106-04-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 04, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-04-T-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 04, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-04-T-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 06, 04, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-F-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-F-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 06, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-F-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 06, 05, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-05-G-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 05, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-05-G-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 06, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-G-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 06, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-L-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 05, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-05-L-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-L-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 06, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-S-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, S, 06, 05, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-S-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, S, 06, 05, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-05-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 05, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-05-T-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 05, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-106-05-T-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, T, 06, 05, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-106-06-F-5
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 06, 5, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-06-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-06-F-D-RC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, RC
Samtec
TMMH-106-06-F-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 06, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-06-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-06-G-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 06, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-06-L-5
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 06, 5, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-06-L-5-001
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 06, 5, Not Available, Not Available, Not Available, Straight, 001, Not Available
Samtec
TMMH-106-06-L-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-06-L-D-RC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, RC
Samtec
TMMH-106-06-L-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 06, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-106-06-S-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, S, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-06-T-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 06, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-106-06-T-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, T, 06, 06, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-107-01-F-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-107-01-F-D-005
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, D, Not Available, Not Available, Not Available, Straight, 005, Not Selected
Samtec
TMMH-107-01-F-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 07, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-001
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 07, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, 001, Not Available
Samtec
TMMH-107-01-F-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-A-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, F, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-A-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, F, 07, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 07, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, F, 07, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-F-Q
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, Q, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-107-01-F-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-107-01-F-T-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, F, 07, 01, T, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-107-01-G-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 07, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-107-01-G-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 07, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 07, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-A-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, G, 07, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 07, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-DV-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, G, 07, 01, DV, Not Available, Not Selected, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-G-T
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 07, 01, T, Not Available, Not Available, Not Available, Straight, Not Selected, Not Available
Samtec
TMMH-107-01-G-T-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, G, 07, 01, T, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-107-01-H-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, H, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-D
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 07, 01, D, Not Available, Not Available, Not Available, Straight, Not Selected, Not Selected
Samtec
TMMH-107-01-L-D-RA
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Not Available, L, 07, 01, D, Not Available, Not Available, Not Available, RA, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-A
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 07, 01, DV, Not Available, A, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-A-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-A-M-FR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
FR, L, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-A-M-TR
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
TR, L, 07, 01, DV, Not Available, A, M, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-LC
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 07, 01, DV, Not Available, LC, Not Selected, Surface Mount, Not Selected, Not Available
Samtec
TMMH-107-01-L-DV-M
Low Profile Header Strips with End Shroud, 2.00 mm Pitch
Blank: Tubes, L, 07, 01, DV, Not Available, Not Selected, M, Surface Mount, Not Selected, Not Available
Samtec
