Samtec – conectores de alta velocidad

EJH - .100" Shrouded IDC Ejector Header de Samtec

Catálogo de productos

TC Componentes soluciones de electrónica industrial
TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

1

Personalización extrema
con millones de combinaciones posibles

2

Asesoramiento técnico
para elegir el conector perfecto

3

Entrega rápida
sin pedidos mínimos

300.000 coches eléctricos funcionan gracias a nuestros conectores

Catálogo de componentes Samtec - EJH - .100" Shrouded IDC Ejector Header (Página 1 de 3)

Fabricante

Samtec

Flexible Stacking > IDC Cable Systems > .100" Pitch IDC Terminals & Sockets (2.54 mm) > EJH - .100" Shrouded IDC Ejector Header

Flexible Stacking

Align the QR code within the frame to scan.

IDC Cable Systems

Tiger Eye™ IDC cables, IDC connectors, FFC cables and connectors, & ribbon cable connectors with high reliability contacts on 1.27 mm and 2.00 mm pitch, as well as dual beam contacts on 2.54 mm pitch.

.100" Pitch IDC Terminals & Sockets (2.54 mm)
These .100" pitch IDC terminals and sockets range from 2 to 36 pins per row, feature a low profile slim design, and come in a variety of wiring configurations
EJH - .100" Shrouded IDC Ejector Header
EJH - .100" Shrouded IDC Ejector Header
  • .100" (2.54 mm) pitch, double row
  • Most common pin counts from 10 to 50
  • Polarization notch
  • Through-hole, right-angle and surface mount
Codigo Nombre Características Fabricante PDFs
EJH-105-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-RA-05 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 005, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option005
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-RA-06 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 006, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option006
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-SM-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-SM-01-P-TR .100" Shrouded IDC Ejector Header TR, F, 01, Show, 001, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option001
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-F-D-SM-10 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 010, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-SM-10-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, 010, Not Selected, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option010
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-F-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, F, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsTR
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-F-D-SM-LC-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-F-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-F-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, F, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-F-D-TH-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-FM-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, FM, 01, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionFM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-FM-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, FM, 01, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionFM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-FM-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, FM, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionFM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-RA-02 .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, 002, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option002
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-RA-10 .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, 010, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-SM-K .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-L-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, L, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsTR
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-L-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-L-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, Not Selected, LC, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-L-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-L-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, L, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-RA-09 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 009, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option009
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-SM-01-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, 001, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option001
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-S-D-SM-02-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, 002, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option002
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-S-D-SM-10 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 010, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-S-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-SM-LC-05-P .100" Shrouded IDC Ejector Header Samtec
EJH-105-01-S-D-SM-LC-06 .100" Shrouded IDC Ejector Header Samtec
EJH-105-01-S-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, LC, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-S-D-SM-LC-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, LC, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-S-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-S-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-01-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-TH-07 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 007, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option007
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-TH-09 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 009, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option009
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-S-D-TH-10 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 010, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-01-SM-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-01-SM-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, SM, 01, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsTR
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-01-SM-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-02-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-02-F-D-RA-04 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, 004, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization Option004
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-02-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-02-F-D-SM-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-F-D-SM-K-FR .100" Shrouded IDC Ejector Header FR, F, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsFR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-F-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-02-F-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Show, Not Selected, LC, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-F-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-02-F-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-02-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-RA-02 .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, 002, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization Option002
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-RA-10 .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, 010, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Selected, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, LC, 05, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-SM-P-FR .100" Shrouded IDC Ejector Header FR, L, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsFR
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-02-L-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, L, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-02-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-02-L-D-TH-10 .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, 010, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization Option010
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-02-S-D-SM-K .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-S-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Show, Not Selected, LC, 05, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-105-02-S-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, S, 02, Show, Not Selected, Not Selected, 05, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions05
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-105-02-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-105-02-SM-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 02, Not Applicable, Not Selected, Not Available, 05, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions05
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-106-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 06, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-106-01-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Selected, 06, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions06
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-106-01-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 06, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-106-01-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 06, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-106-02-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 06, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-106-02-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 06, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-106-02-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 06, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions06
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-106-02-L-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Show, Not Selected, Not Selected, 06, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions06
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-107-01-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-F-D-SM-01-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, 001, Not Selected, 07, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option001
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-107-01-F-D-SM-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-107-01-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, LC, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-F-D-SM-LC-14 .100" Shrouded IDC Ejector Header Samtec
EJH-107-01-F-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 07, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-107-01-F-D-SM-LC-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 07, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-F-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-F-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, F, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-F-D-TH-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-F-D-TH-14 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 014, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option014
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-FM-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, FM, 01, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionFM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-107-01-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-L-D-SM-01-P .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, 001, Not Selected, 07, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option001
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-L-D-SM-14-P-TR .100" Shrouded IDC Ejector Header TR, L, 01, Show, 014, Not Selected, 07, -D: Double, SM, P
Packaging OptionsTR
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option014
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-L-D-SM-LC-14 .100" Shrouded IDC Ejector Header Samtec
EJH-107-01-L-D-SM-LC-14-P .100" Shrouded IDC Ejector Header Samtec
EJH-107-01-L-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-L-D-SM-P-FR .100" Shrouded IDC Ejector Header FR, L, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsFR
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-L-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, L, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsTR
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-SM-14 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 014, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option014
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, K
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-107-01-S-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, LC, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-SM-LC-06 .100" Shrouded IDC Ejector Header Samtec
EJH-107-01-S-D-SM-LC-14 .100" Shrouded IDC Ejector Header Samtec
EJH-107-01-S-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-S-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-01-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-TH-06 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 006, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option006
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-TH-07 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 007, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option007
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-S-D-TH-14 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 014, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option014
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-01-SM-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, LC, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-01-SM-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-02-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 07, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-107-02-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-02-F-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 07, -D: Double, SM, K
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-107-02-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, LC, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-02-F-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 07, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-107-02-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-02-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 07, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-107-02-L-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, LC, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-02-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-107-02-S-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, Not Selected, Not Selected, 07, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions07
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-107-02-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, Not Selected, Not Available, 07, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions07
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-RA-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-SM-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-SM-02 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 002, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option002
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-SM-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-01-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, LC, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-SM-LC-16 .100" Shrouded IDC Ejector Header Samtec
EJH-108-01-F-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 08, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-01-F-D-SM-LC-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, LC, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-F-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-TH-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-F-D-TH-05 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 005, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option005
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-FM-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, FM, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, K
Packaging OptionsTR
Plating OptionFM
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-01-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-01-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-L-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, LC, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-L-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-RA-16 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 016, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option016
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-SM-01 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 001, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-SM-01-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, 001, Not Selected, 08, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option001
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-S-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, K
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-01-S-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, LC, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, LC, 08, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-01-S-D-SM-LC-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, LC, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-S-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-S-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, S, 01, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-01-S-D-TH-15 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 015, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option015
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-S-D-TH-16 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, 016, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option016
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-01-SM-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-01-SM-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, SM, 01, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionSM
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-02-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-02-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-02-F-D-SM-K-FR .100" Shrouded IDC Ejector Header FR, F, 02, Show, Not Selected, Not Selected, 08, -D: Double, SM, K
Packaging OptionsFR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-02-F-D-SM-K-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 08, -D: Double, SM, K
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-02-F-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, LC, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-02-F-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-02-F-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, F, 02, Show, Not Selected, Not Selected, 08, -D: Double, SM, P
Packaging OptionsTR
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-108-02-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-02-L-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-02-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Selected, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-02-L-D-SM-LC .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, LC, 08, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-108-02-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-02-S-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-108-02-S-D-SM-LC-K .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Show, Not Selected, LC, 08, -D: Double, SM, K
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsLC
Number Of Positions08
Row Specification-D: Double
Tail OptionSM
Pick & Place PadK
Samtec
EJH-108-02-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, Not Selected, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-108-02-S-D-TH-15 .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Not Applicable, 015, Not Available, 08, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization Option015
Locking ClipsNot Available
Number Of Positions08
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-109-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 09, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions09
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-109-01-F-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 09, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions09
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-109-01-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Selected, 09, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-109-01-L-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, L, 01, Not Applicable, Not Selected, Not Available, 09, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions09
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-109-01-S-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Selected, 09, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-109-01-S-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Show, Not Selected, Not Selected, 09, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-109-01-S-D-TH .100" Shrouded IDC Ejector Header Blank: Tubes, S, 01, Not Applicable, Not Selected, Not Available, 09, -D: Double, TH, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions09
Row Specification-D: Double
Tail OptionTH
Pick & Place PadNot Selected
Samtec
EJH-109-02-L-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, L, 02, Not Applicable, Not Selected, Not Selected, 09, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionL
Lead Style02
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-109-02-S-D-SM-P .100" Shrouded IDC Ejector Header Blank: Tubes, S, 02, Show, Not Selected, Not Selected, 09, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-109-02-S-D-SM-P-TR .100" Shrouded IDC Ejector Header TR, S, 02, Show, Not Selected, Not Selected, 09, -D: Double, SM, P
Packaging OptionsTR
Plating OptionS
Lead Style02
Pad Show/Hide (Model Only)Show
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions09
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-110-01-F-D-RA .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Available, 10, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Available
Number Of Positions10
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-110-01-F-D-RA-01 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 001, Not Available, 10, -D: Double, RA, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option001
Locking ClipsNot Available
Number Of Positions10
Row Specification-D: Double
Tail OptionRA
Pick & Place PadNot Selected
Samtec
EJH-110-01-F-D-SM .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, Not Selected, Not Selected, 10, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization OptionNot Selected
Locking ClipsNot Selected
Number Of Positions10
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec
EJH-110-01-F-D-SM-16-P .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Show, 016, Not Selected, 10, -D: Double, SM, P
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Show
Polarization Option016
Locking ClipsNot Selected
Number Of Positions10
Row Specification-D: Double
Tail OptionSM
Pick & Place PadP
Samtec
EJH-110-01-F-D-SM-20 .100" Shrouded IDC Ejector Header Blank: Tubes, F, 01, Not Applicable, 020, Not Selected, 10, -D: Double, SM, Not Selected
Packaging OptionsBlank: Tubes
Plating OptionF
Lead Style01
Pad Show/Hide (Model Only)Not Applicable
Polarization Option020
Locking ClipsNot Selected
Number Of Positions10
Row Specification-D: Double
Tail OptionSM
Pick & Place PadNot Selected
Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

1

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

2

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

3

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

4

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

5

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

6

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

7

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial  a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

TC Componentes – Mayorista de electrónica industrial
Certificado ISO 9001 — TC Componentes

Trabajamos con los mejores fabricantes mundiales y te traemos los componentes electrónicos que necesitas para que tu proyecto sea un éxito.

Encuentra tu componenteEncuentra tu componente

TC COMPONENTES S.L.U.
Camí de Can Calders 6, local 12G
08173 SANT CUGAT DEL VALLÉS
Teléfono: (34) 93 590 2830
Email: infoweb@tc-componentes.es

(c) 2026 TC Componentes S.L. Todos los derechos reservados. Diseño web: The Art of Ecommerce

Área de clientes

infoweb@tc-componentes.es

(34) 93 590 28 30

Pide presupuesto

×
Cargando...
×
Cargando...
Go to Top