Samtec – conectores de alta velocidad

TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch de Samtec

Catálogo de productos

TC Componentes soluciones de electrónica industrial
TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

1

Personalización extrema
con millones de combinaciones posibles

2

Asesoramiento técnico
para elegir el conector perfecto

3

Entrega rápida
sin pedidos mínimos

300.000 coches eléctricos funcionan gracias a nuestros conectores

Catálogo de componentes Samtec - TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch (Página 11 de 33)

Fabricante

Samtec

Flexible Stacking > Bottom-Entry > E.L.P.™ High Mating Cycle Connectors > TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

Flexible Stacking

Align the QR code within the frame to scan.

Bottom-Entry

Bottom entry terminals and sockets in .100", 2mm, .050" x .100", .050" x .050", and 1mm pitches

E.L.P.™ High Mating Cycle Connectors
These high mating cycle connectors are tested to rigorous standards which evaluate contact resistance in simulated storage and field conditions.
TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch
TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch
  • Application: Industry's largest variety of low profile pin counts, terminal lengths and options
  • Contact System: .020" (0.50 mm) square post
  • Up to 8 Gbps performance
  • Orientation: Vertical, right-angle
  • Pitch: 2.00 mm (.0787")
  • Special Features: FleXYZ™ provides design flexibility in all three axes up to four rows wide and 200 pins
  • Termination: Through-hole, surface mount
  • Automotive A-Series product available
Codigo Nombre Características Fabricante PDFs
TMM-107-05-L-D-SM-A-001-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 05, D, -A, -P, -SM, Not Selected, 001, Not Available
Plating OptionL
No. Pins per Row07
Lead Style05
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position001
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-L-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 05, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style05
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-L-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 05, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-L-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 05, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style05
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-L-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 05, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style05
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-S-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 05, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-T-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 05, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-T-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 05, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-T-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 05, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style05
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-T-Q Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 05, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style05
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-05-T-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 05, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style05
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-013 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Available, Not Available, Straight, Not Available, 013, Not Selected
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position013
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-RC Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, -RC
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip Option-RC
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Selected, -P, -SM, -FR, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-F-S-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 07, 06, S, Not Available, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-RC Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, -RC
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip Option-RC
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-G-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 07, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-H-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionH
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-H-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 07, 06, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionH
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-RC Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, -RC
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip Option-RC
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-A-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, -A, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-L-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 07, 06, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-LM-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-LM-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-RC Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, -RC
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip Option-RC
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Selected, -P, -SM, -FR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-S-S-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 07, 06, S, Not Available, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-SM-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch SM, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionSM
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-SM-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch SM, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionSM
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-013 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Available, Not Available, Straight, Not Available, 013, Not Selected
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position013
Retention Clip OptionNot Selected
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-006 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, 006, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized Position006
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-T-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch T, 07, 06, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionT
No. Pins per Row07
Lead Style06
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-107-06-TM-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch TM, 07, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionTM
No. Pins per Row07
Lead Style06
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-RA-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, Not Available, -RA, Not Available, 002, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-SM-002-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, -P, -SM, Not Selected, 002, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-F-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch F, 08, 01, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionF
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-001 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Available, Not Available, Straight, Not Available, 001, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position001
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-RA-006 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Available, Not Available, -RA, Not Available, 006, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position006
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A-001-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, -P, -SM, Not Selected, 001, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position001
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, -P, -SM, -FR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-A-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, -A, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Selected, -P, -SM, -FR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-Q Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-Q-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-Q-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, Q, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, Straight, Not Available, 002, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-007 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, Straight, Not Available, 007, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position007
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-RA-003 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, -RA, Not Available, 003, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position003
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-G-S-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch G, 08, 01, S, Not Available, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionG
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-D-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-D-SM-014-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, D, Not Selected, -P, -SM, Not Selected, 014, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position014
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-Q-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-Q-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, Q, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-H-S-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch H, 08, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionH
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, Straight, Not Available, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-005 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, Straight, Not Available, 005, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position005
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-007 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, Straight, Not Available, 007, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position007
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-016 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, Straight, Not Available, 016, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position016
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-RA-012 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, -RA, Not Available, 012, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position012
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-RE-009 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, -RE, Not Available, 009, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized Position009
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-RE-014 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Available, Not Available, -RE, Not Available, 014, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized Position014
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-001 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, 001, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized Position001
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-002-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, Not Selected, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-008 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, 008, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized Position008
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-010-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, Not Selected, 010, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position010
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-010-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, -FR, 010, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized Position010
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-010-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, -TR, 010, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized Position010
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-016 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, 016, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized Position016
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-016-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, Not Selected, 016, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position016
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A-010-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, -P, -SM, Not Selected, 010, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position010
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, -P, -SM, -FR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-A-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, -A, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-P-FR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, -FR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-FR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-Q Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-Q-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Available, Straight, Not Available, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-RA-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Available, -RA, Not Available, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-RE-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Available, -RE, Not Available, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-SM-002-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, -P, -SM, Not Selected, 002, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, -P, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-L-S-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch L, 08, 01, S, Not Available, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionL
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-LM-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch LM, 08, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionLM
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-RE Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RE
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-006-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Selected, -P, -SM, -TR, 006, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized Position006
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-A Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place PadNot Selected
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-A-006-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, -A, -P, -SM, -TR, 006, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized Position006
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-A-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-A-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment Pin-A
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-P Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and ReelNot Selected
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-P-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place Pad-P
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-D-SM-TR Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionD
Alignment PinNot Selected
Pick and Place PadNot Selected
Tail Option-SM
Tape and Reel-TR
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-Q-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionQ
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-S Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-S-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, S, Not Available, Not Available, Straight, Not Available, 002, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail OptionStraight
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-S-RA Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized PositionNot Selected
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec
TMM-108-01-S-S-RA-002 Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch S, 08, 01, S, Not Available, Not Available, -RA, Not Available, 002, Not Available
Plating OptionS
No. Pins per Row08
Lead Style01
Row OptionS
Alignment PinNot Available
Pick and Place PadNot Available
Tail Option-RA
Tape and ReelNot Available
Polarized Position002
Retention Clip OptionNot Available
POLOPTALG3Not Available
Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

1

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

2

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

3

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

4

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

5

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

6

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

7

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial  a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

TC Componentes – Mayorista de electrónica industrial
Certificado ISO 9001 — TC Componentes

Trabajamos con los mejores fabricantes mundiales y te traemos los componentes electrónicos que necesitas para que tu proyecto sea un éxito.

Encuentra tu componenteEncuentra tu componente

TC COMPONENTES S.L.U.
Camí de Can Calders 6, local 12G
08173 SANT CUGAT DEL VALLÉS
Teléfono: (34) 93 590 2830
Email: infoweb@tc-componentes.es

(c) 2026 TC Componentes S.L. Todos los derechos reservados. Diseño web: The Art of Ecommerce

Área de clientes

infoweb@tc-componentes.es

(34) 93 590 28 30

Pide presupuesto

×
Cargando...
×
Cargando...
Go to Top