TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch de Samtec

Catálogo de productos

Tenemos la solución ideal para ti

cabezal-samtec

cabezal-samtec

TC Componentes soluciones de electrónica industrial

TC Componentes soluciones de electrónica industrial

TC Componentes es distribuidor de Samtec en España y Portugal

Elige entre millones de conectores sin retrasar tu diseño. Samtec está en el top 3 de los fabricantes de conectores de PCB a nivel mundial. Y es el fabricante con el mejor servicio al cliente (mejor servicio al cliente durante 18 años consecutivos, Bishop Associates).

Con Samtec y TC tienes muestras en 48h, entregas rápidas sin pedidos mínimos, y productos sin obsolescencias. Y la posibilidad de personalización extrema: hay más de 2.000 millones de productos posibles. No tienes por qué quedarte con una especificación de serie hecha para otro caso. Ahorra tiempo con nuestro asesoramiento y selecciona de manera eficaz los componentes adecuados para tu producto. Porque si falla el conector, falla todo.

1

Personalización extrema
con millones de combinaciones posibles

2

Asesoramiento técnico
para elegir el conector perfecto

3

Entrega rápida
sin pedidos mínimos

300.000 coches eléctricos funcionan gracias a nuestros conectores

Catálogo de componentes Samtec - TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch (Página 25 de 33)

Fabricante

Samtec

Ir a la pagina: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Flexible Stacking

Align the QR code within the frame to scan.

Bottom-Entry

Bottom entry terminals and sockets in .100", 2mm, .050" x .100", .050" x .050", and 1mm pitches

E.L.P.™ High Mating Cycle Connectors

These high mating cycle connectors are tested to rigorous standards which evaluate contact resistance in simulated storage and field conditions.

TMM - Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

Application: Industry's largest variety of low profile pin counts, terminal lengths and options
Contact System: .020" (0.50 mm) square post
Up to 8 Gbps performance
Orientation: Vertical, right-angle
Pitch: 2.00 mm (.0787")
Special Features: FleXYZ™ provides design flexibility in all three axes up to four rows wide and 200 pins
Termination: Through-hole, surface mount
Automotive A-Series product available

Codigo

Nombre

Características

Fabricante

PDFs

TMM-120-06-T-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 20, 06, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	20
Lead Style	06
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-120-06-TM-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 20, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	20
Lead Style	06
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-120-06-TM-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 20, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	20
Lead Style	06
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-F-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-F-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-F-S-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 01, S, Not Available, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-G-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-G-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-G-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-G-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-D-RE

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RE
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-L-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-S-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-S-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-S-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-S-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-SM-S-RA-010

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 21, 01, S, Not Available, Not Available, -RA, Not Available, 010, Not Available

Plating Option	SM
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	010
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-D-SM-A-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-T-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-TM-D-SM-A-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 21, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-TM-D-SM-A-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 21, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	21
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-01-TM-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 21, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	21
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-F-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 02, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	02
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-L-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 02, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	02
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-S-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 02, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	02
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-S-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 02, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	02
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-02-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	21
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-G-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 03, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	03
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-G-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-L-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-S-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-03-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-04-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 04, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	04
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 21, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected

Plating Option	F
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Selected
POLOPTALG3	Not Available

Samtec

TMM-121-06-G-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 21, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-L-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-L-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 21, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-S-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 06, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-S-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 06, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-S-D-SM-A-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 06, D, -A, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-S-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 21, 06, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	21
Lead Style	06
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-T-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 06, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	06
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-121-06-T-S-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 21, 06, S, Not Available, -P, -SM, -TR, Not Selected, Not Available

Plating Option	T
No. Pins per Row	21
Lead Style	06
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-RA-003

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Available, Not Available, -RA, Not Available, 003, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	003
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-SM-FR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Selected, Not Selected, -SM, -FR, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-FR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-D-SM-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-S-RE

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, S, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RE
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-F-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-RA-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Available, Not Available, -RA, Not Available, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-RA-025

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Available, Not Available, -RA, Not Available, 025, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	025
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-020-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, -P, -SM, Not Selected, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-A-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, -A, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-D-SM-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-S-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, S, Not Available, -P, -SM, -TR, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-G-S-SM-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 01, S, Not Available, Not Selected, -SM, -TR, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-014

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, Straight, Not Available, 014, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	014
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-RA-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, -RA, Not Available, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-RE

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RE
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A-020-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, -P, -SM, Not Selected, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A-020-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, -P, -SM, -TR, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-A-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, -A, Not Selected, -SM, -TR, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-D-SM-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, D, Not Selected, Not Selected, -SM, -TR, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-L-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-SM-A-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-LM-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-RA-009

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Available, Not Available, -RA, Not Available, 009, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	009
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-RE

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RE
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-A-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, -A, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-A-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, -A, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-A-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, -A, -P, -SM, -TR, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-S-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-SM-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	SM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-SM-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	SM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-SM-D-SM-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	SM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-019

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Available, Not Available, Straight, Not Available, 019, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	019
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-RE

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Available, Not Available, -RE, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RE
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-SM-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Selected, Not Selected, -SM, Not Selected, 020, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-S-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, S, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-T-S-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 01, S, Not Available, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	01
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-TM-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 22, 01, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-TM-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 22, 01, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	22
Lead Style	01
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-01-TM-Q-RA

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

TM, 22, 01, Q, Not Available, Not Available, -RA, Not Available, Not Selected, Not Available

Plating Option	TM
No. Pins per Row	22
Lead Style	01
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	-RA
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-G-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 02, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-G-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 02, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	02
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-G-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 02, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	02
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-L-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 02, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-L-D-025

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 02, D, Not Available, Not Available, Straight, Not Available, 025, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	025
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-S-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-02-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 02, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	02
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-F-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-G-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 03, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-G-D-025

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 03, D, Not Available, Not Available, Straight, Not Available, 025, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	025
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-G-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-H-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

H, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	H
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-L-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 03, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-L-D-025

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 03, D, Not Available, Not Available, Straight, Not Available, 025, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	025
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-L-Q

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 03, Q, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	03
Row Option	Q
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-L-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-LM-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

LM, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	LM
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-S-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-S-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 03, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-S-D-025

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 03, D, Not Available, Not Available, Straight, Not Available, 025, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	025
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-S-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

S, 22, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	S
No. Pins per Row	22
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-SM-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	SM
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-SM-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

SM, 22, 03, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	SM
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-T-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 03, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-T-D-020

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 03, D, Not Available, Not Available, Straight, Not Available, 020, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	03
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	020
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-03-T-S

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 03, S, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	03
Row Option	S
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-F-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 04, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-F-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 04, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	F
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 04, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-G-D-SM-P

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 04, D, Not Selected, -P, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-G-D-SM-P-TR

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 04, D, Not Selected, -P, -SM, -TR, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	-P
Tail Option	-SM
Tape and Reel	-TR
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-04-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 04, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	04
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-G-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 05, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-G-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 05, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-G-D-SM-A

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

G, 22, 05, D, -A, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	G
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	-A
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-L-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 05, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-L-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

L, 22, 05, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	L
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-05-T-D-SM

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

T, 22, 05, D, Not Selected, Not Selected, -SM, Not Selected, Not Selected, Not Available

Plating Option	T
No. Pins per Row	22
Lead Style	05
Row Option	D
Alignment Pin	Not Selected
Pick and Place Pad	Not Selected
Tail Option	-SM
Tape and Reel	Not Selected
Polarized Position	Not Selected
Retention Clip Option	Not Available
POLOPTALG3	Not Available

Samtec

TMM-122-06-F-D

Low Profile Tiger Eye™ Header Strips, 2.00 mm Pitch

F, 22, 06, D, Not Available, Not Available, Straight, Not Available, Not Selected, Not Selected

Plating Option	F
No. Pins per Row	22
Lead Style	06
Row Option	D
Alignment Pin	Not Available
Pick and Place Pad	Not Available
Tail Option	Straight
Tape and Reel	Not Available
Polarized Position	Not Selected
Retention Clip Option	Not Selected
POLOPTALG3	Not Available

Samtec

Respondemos a todo lo que quieres saber (y nadie más responde)

1

¿Qué diferencia a TC Componentes como distribuidor de Samtec?

TC Componentes pone a tu disposición un profundo conocimiento técnico y gran experiencia en soluciones de interconexión.

Nuestra relación cercana con Samtec nos permite ofrecer soporte técnico avanzado y soluciones de diseño personalizadas, garantizando que cada proyecto se ejecute con la máxima precisión y eficiencia.

Esto te ahorra la abrumadora tarea de buscar el conector que necesitas y evita futuros errores que desestabilicen el proyecto.

Además, nuestra capacidad de respuesta es de las más rápidas del mercado. Nos comprometemos a que todas consultas y necesidades sean atendidas sin demoras ni tiempos muertos.

Por último, también gestionamos la entrega de productos listos para usar, reduciendo el tiempo de instalación y el riesgo de errores.

2

¿Qué tipo de proyectos atendéis en TC Componentes como distribuidores de Samtec?

Si eres un fabricante de equipos electrónicos en series cortas, medias o largas, y operas en sectores como electrónica industrial, automoción, electromedicina, telecomunicaciones, sistemas de seguridad, robótica o defensa, TC Componentes es tu socio ideal.

Nos enfocamos en dos tipos de clientes:

– Fabricantes que valoran un servicio eficiente y productos de alta calidad en sectores como máquinas de vending, sistemas de pago, videoporteros, elevadores, robótica, defensa, o electromedicina.

– Proyectos que se benefician de nuestra especialización, en los que nuestro conocimiento técnico garantiza soluciones precisas y eficientes.

3

¿Cuáles son las aplicaciones más frecuentes de los productos de Samtec?

Los productos de Samtec se utilizan frecuentemente en aplicaciones de automoción, aeroespacial, industrial, telecomunicaciones y centros de datos.

Además, debido a su conexión fiable y de alta velocidad en diversas aplicaciones críticas, también se utilizan en equipos médicos, de agricultura o transporte ferroviario y naval.

4

¿Por qué es importante elegir bien un conector para el diseño global?

Elegir el conector adecuado es crucial para el diseño global porque afecta directamente la fiabilidad y el rendimiento del sistema.

Un conector mal seleccionado puede causar fallos de conexión, interferencias y problemas de compatibilidad difíciles de detectar y solucionar, afectando a la integridad del diseño.

En TC Componentes, ayudamos a minimizar estos riesgos proporcionando asesoramiento técnico y soluciones de interconexión optimizadas, asegurando que cada componente se integre de manera eficiente en el sistema.

5

¿Hacéis muestras gratuitas de los productos de Samtec?

Sí, ofrecemos muestras gratuitas para que los clientes prueben y evalúen los conectores en sus propios entornos antes de realizar una compra a gran escala.

Las muestras ayudan a garantizar que el producto elegido cumple con los requisitos técnicos y operativos específicos del proyecto.

6

¿Cuáles son los plazos de entrega de los productos de Samtec?

Samtec se distingue por su rapidez en la entrega. Además, para casos urgentes ofrece un servicio llamado «sudden service» que garantiza envíos desde fábrica de más de 200.000 piezas en tan solo 24 horas desde la confirmación del pedido.

En TC Componentes, aprovechamos esta agilidad para asegurar que recibas tus productos de manera eficiente, adaptándonos a tus necesidades específicas y reduciendo al mínimo los tiempos de espera.

7

¿Cuáles son los siguientes pasos para obtener más información o realizar un pedido?

Para obtener más información o realizar un pedido, contacta con nuestro equipo de ventas y soporte técnico.

Estamos disponibles para responder a tus preguntas, proporcionar asesoramiento personalizado y ayudarte a seleccionar los productos más adecuados para tu proyecto.

Puedes contactarnos a través de nuestra web y te responderemos en un plazo máximo de 48 horas.

Contáctanos

Contáctanos directamente

puedes contactar por teléfono, correo o email

Tel. (34) 93 590 28 30

TC COMPONENTES S.L.

Camí de Can Calders, 6 local 12G
08173 SANT CUGAT DEL VALLÉS (Barcelona – España)

infoweb@tc-componentes.es

Potencia en soluciones de electrónica industrial a tu alcance

O rellena el formulario

Danos tus datos y un resumen de lo que necesitas y nos pondremos en contacto contigo.

Trabajamos con los mejores fabricantes mundiales y te traemos los componentes electrónicos que necesitas para que tu proyecto sea un éxito.

TC COMPONENTES S.L.U.
Camí de Can Calders 6, local 12G
08173 SANT CUGAT DEL VALLÉS
Teléfono: (34) 93 590 2830
Email: infoweb@tc-componentes.es

(c) 2026 TC Componentes S.L. Todos los derechos reservados. Diseño web: The Art of Ecommerce