Amphenol Conec

D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is done by using different contact types without having to change the shape, size and installation dimensions of the connector itself. By using high-current contacts, the power supply of the device can be realized without an additional interface for the power supply. High-voltage contacts allow operating voltages of up to 2.8 kV.

• Fast signal transmission over shielded coaxial lines is achieved with the use of special coaxial contacts. A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series.
• In all variants, different combinations with signal, high current, high voltage or coaxial contacts are possible. The combination of different contact types offers interesting possibilities to save space and costs in the interface area. The connectors are always supplied with signal contacts, except for the crimp version. The high-current, high-voltage and coaxial contacts can be ordered separately or can be mounted in the connector at the factory.

D-SUB Filter Combination connectors from CONEC are equipped with the single-stage C-filter and are available in the versions 2W2C, 3W3C, 3W3, 5W5 and 8W8. Depending on the version, you can choose between the nominal capacities 1.3 nF, 5.0 nF, 10 nF, 12 nF, 47 nF and 100 nF as standard. Other capacitance values are available on request.

CONEC offers a wide range of contacts for D-SUB and D-SUB Combination connectors. These can be purchased individually or installed directly in our D-SUB Combination connectors according to customer specifications. The portfolio includes signal contacts, high-current contacts, high-voltage contacts and coaxial contacts. The connection side of the cable is designed according to the processing purpose. All contact variants are high-quality precision machined contacts.

Data communication and control systems do not stop at outdoor use. Whether heat or cold, humidity or chemical substances, machines and therefore also connectors are used in all these environments and ensure that power and signals find their way reliably. In the field of waterproof IP67 D-SUB connectors Standard/High Density, CONEC not only offers a wide range of pole numbers, mounting and connection options, but also the option of choosing between 3 different housing variants (Solid Body, CONEC SlimCon, Standard Housing) depending on the application.

• The advantage of the IP67 D-SUB solid body connectors is their one-piece zinc die-cast housing with nickel-plated surface, which protects the contact area even under high mechanical loads. In addition to the standard versions with solder cup, solder pin straight and angled termination types with various mounting options, high-density and combination D-SUB versions are also available.
• The IP67 D-SUB CONEC SlimCon connector series offers very small dimensions in addition to its one-piece zinc die-cast housing. The size of the housings corresponds to the standard dimensions of D-SUB connectors, so no new cut-outs are required and a 1:1 conversion from standard IP20 systems to the IP67 system of the CONEC SlimCon series is possible. Compared to IP67 protected connectors with an extended sealing frame, IP67 D-SUB CONEC Slimcon connectors achieve a reduction of the occupied area of 48% to 52%.

IP67 Hoods are available in housing sizes 1 to 5 and can accommodate various cables with a diameter of 7 to 16 mm, depending on the size. In addition to a very compact hood, the portfolio also includes variants with a large interior and protective caps. The IP67 D-SUB hood versions are available shielded and unshielded – alternatively with short screw or jack screw.

The RJ45 connector most commonly used in office communication has been made suitable for industrial Ethernet applications. On this basis, CONEC has developed a versatile connector system for Cat. 5e and Cat. 6A that guarantees reliable protection and convenient connection options even under difficult and harsh environmental conditions. The housings are available in plastic black, plastic metallized or metal. For color coding, the plastic version is available in different colors on request.

• IP67 RJ45 connectors are available in the version’s inline coupler with or without protective cap with M28 or bayonet locking for front and rear panel mounting. It is possible to choose between solder (with or without strain relief), IDC or screw termination types. Adapters with double bayonet are also available. Cable connectors with IDC termination, patch cables and protective caps complete the program.

In addition to IP67 RJ45 and IP67 USB, CONEC also offers ODVA-compatible IP67 fiber optic connectors for harsh indoor and outdoor environments in the 17 series. The system is based on a bayonet locking housing with integrated LC Duplex Connectors and Adapters. The bayonet locking provides an easy and secured connection also under harsh environmental conditions. The available materials for the housings are plastic, plastic metallized or nickel plated zinc die-cast for extreme harsh conditions. The LC connections are available for single mode or multimode transmission, depending on the requirements of the operated system.

• The major application for these connectors are connections from base stations to the transmission modules based on antenna poles or for network connections on the last mile into end users homes. This program is supplemented by preassembled patch cables in various lengths.
• For a variety of different Fiber Optic connections CONEC supplies a wide range of Fiber Optic adapters. To support different application requirements in regards to transmission. CONEC adapters are available with Phosphor- Bronze or ceramic sleeves for precise positioning of the connector ferrules to each other. Adapters are available in both, plastic or zinc die-cast housing. The adapters are offered in simplex and duplex configurations. All CONEC Fiber Optic Adapters are supplied with preinstalled dust caps.

Hybrid overmoulded connectors are offered as single ended and connection cables in various standard lengths and are electrically tested with regard to transmission properties according to IEC 11801 Cat 5e. All four sizes (B12, B17, B23, B40) are equipped with a bayonet locking mechanismand thus guarantee a fast and secure connection.

• Receptacles are available in sizes B12, B17, B23, B40 and in seven different designs:
• Front wall mounting, short or long
• Rear panel mounting, short or long
• Square receptacles, short or long
• Receptacles, angled, rotatable
• Quick and secure locking is ensured by the bayonet locking

Our active junction boxes enable direct connection of sensors and actuators to modern control systems – quickly, flexibly, and in a decentralized manner.

• They support common communication protocols such as PROFINET, EtherCAT, and IO-Link, and can be seamlessly integrated into existing automation environments.
• The devices are available in master or slave variants. While master boxes allow direct access to IO-Link devices, slave boxes capture signals and reliably transmit them to the higher-level control system.

Connectors with overmoulded cables are available in sizes M8, M12, 7/8 and round24. The overmoulded connector series reduce costs and time during installation and offer end-to-end protection from the connector to the cable, including tamper protection.

• In addition to standard coding and cables, CONEC also offers BUS variants with B, D, P and X coding as well as power versions with K, L, S and T coding. The screw connection is offered as the standard locking type and the portfolio also includes snap-on and screw-snap variants in the M8 range. The M12 quick-release version with bayonet locking completes the range in the M12 size.
• Especially for municipal technology, the agricultural sector and the chemical industry, CONEC offers overmoulded M12x1 connector variants with coloured plastic coupling elements. In addition to the standard zinc die-cast or turned stainless steel versions, the plastic elements open up new fields of application.

CONEC offers a comprehensive range of socket connectors in a wide variety of sizes, designs and connection types. Choose from sizes M8x1, M12x1 or 7/8″, flanges with stranded wire, PCB contacts or overmoulded variants for front or rear panel mounting, with PG9 or M16x1.5 thread.

• Versions for direct PCB mounting in axial and angled design as well as insulation bodies for SMT/THR processing are also available.
• In addition to screw and screw-snap locking systems, CONEC also offers socket connectors with M12 bayonet quick locking. The bayonet socket connectors with stranded wire connection or direct PCB connection are equipped with an internal thread in the mating area and therefore guarantee 100 % backwards compatibility with standard M12 connectors. This means that new systems can be fitted with the M12 bayonet on the device side without any concerns.

With the introduction of information technology into industrial production and the networking of all areas of industry, the demands on connector manufacturers are increasing. A network infrastructure must be created that enables a good connection to the IT systems at control level on the one hand and good real-time properties for communication between the decentralized field devices and the control systems on the other. High reliability and fail-safe operation are basic requirements for connectors. CONEC offers connectors for Profibus DP, DeviceNet, EtherCAT P and Industrial Ethernet up to 10 Gbit for bus technology. In addition to socket connectors, field attachable connectors and open-ended connection cables, connection cables with RJ45 on the B-side or pure patch cables RJ45 – RJ45 are also offered.

Juctions systems provide a cost-effective and practical wiring system in the field for sensors and actors with a cabling system that meets IP67 requirement. Junction systems are used anywhere sensor and actor signals need to be extended quickly and easily for control systems. Individual signals are either connected directly to the system via a homerun cable or via a connection interface.

The overmoulded AT and DT connectors from CONEC offer a high level of IP protection (IP67/IP69K).The overmoulding ensures continuous protection from the housing to the cable. No liquid can penetrate the cable between the sheath and the core. The AT series is available as 2-pos. female connector with or without protection circuit. The DT connector portfolio comprises number of poles 2 to 12 as female or male version. Several number of poles are also available with protection circuit suppressor diode / LED , terminating cap, double outlet or angled.

Whether tractors, excavators or heavy construction machinery, the IVCM (Industrial Vehicles and Construction Machines) segment places high demands on the connectors used. The overmoulded VSS Superseal connectors developed by CONEC offer optimum protection even in the most difficult applications, such as underground, at sub-zero temperatures or in dusty, hot environments.

• The VSS Superseal connectors are designed as a cable-to-cable connection and latch/lock securely with the mating connector via a latch. Thanks to the CONEC overmoulding, the entire connector fulfils the IP67 / IP69K degree of protection when mated. The CONEC portfolio of Superseal connectors includes number of poles 2 to 6 in female or male versions. Several number of poles are also available as terminating plug and double outlet.

In the commercial vehicle industry and in agricultural, construction and municipal technology as well as in the off-road sector, connector systems are required that offer extremely high performance even under the most difficult environmental conditions, such as sub-zero temperatures or in dusty, hot environments.

• The HDSCS (Heavy Duty Sealed Connector System) connectors or even complete HDSCS systems with cable are designed precisely for this purpose.The HDSCS interface is used for heavy-duty transport, truck and trailer cabling, for example modern systems such as Ad-Blu tanks and pump systems, exhaust systems and rear lights. CONEC currently offers the 8-pos. type C connector.